Separate names with a comma.
Some features disabled for guests. Register Today.
Excellent! For anyone who does want separate gcode files for all ops, you can set it up like this. [ATTACH] [ATTACH] [ATTACH]
If you want it to work the way you describe, just set up the same tool with different tool numbers :)
No. It creates a new file when a different tool number is found. So, lets say you have 5 tool paths. 1,2 and 3 use tool 1 4 uses tool 2 5 uses...
Dry silicone spray works wonders on those nut blocks. I use the WD-40 brand but there are others. Just make sure its the dry stuff and spray it...
How are you sending the gcode to the BB?
keyboard.
Works for me. [ATTACH]
Used to be. Let me check. I havent tried since the keyboard shortcuts were added.
DM me with the info. I have some suggestions we should take offline.
I'm going to ask a really dumb question here. Does your stock need to be that thick? I dont see any features that will be at the top of the...
LOL. Yes, sorry. Yes, that's what I did. I was quoted $12k but built it for $1k. Now I need inexpensive for those diy brakes :) No biggy....
Dont really need that. Has to be simple stupid. Move to 1". Move to 30mm. Looks like I'm going to have to write my own again.
I saw that, but I cant expect people to enter in steps.
Neither. Specially for a backgauge for a press brake. Here's the one I made before. User enters in locations. Limit switch triggers move to...
Anyone know of a simple single axis motion controller that would allow me to enter in positions to move to? I made my own using a raspberry pi...
I use it all the time on my Tormach. Never had a need on my Workbee.
No, not to make them work. There's other things you will want to consider adjusting like driver power, rapid speeds....
LOL. Been there. :)
@Steveathome Sorry for being a dumb dumb (I blame Monday) but are you trying to tell me that there is a key mapping mismatch that you had to fix?...
You can use 2 conductor wire. But I think maybe the led on them wont light up. Not sure on that, but I only have 2 wires going to mine. I...