Separate names with a comma.
Some features disabled for guests. Register Today.
If the play is only the nut blocks, loosen one nut block, squeeze gently together, tighten nut block. Alex.
Pleased to hear that - the clue was that your circles had flat spots. Alex.
If circles are not round the most likely cause is backlash. Looking at your pictures I would suggest you start looking for play in the X axis....
They didn't look too far off to me. This chart might help - it gives speeds and feeds for a 1/4" bit (but doesn't say what type of bit - No of...
Have you checked that nothing has worked loose on your machine. You don't give us any details of the machine (size, leadscrew or belt drive,...
V carve and Fusion both have cam functions and produce g-code that is compatible with grbl. The blackbox runs grbl. Openbuilds has free software...
Can I suggest that you have a look at the Openbuilds Lead machine or the Workbee. If you are new to cnc then consider the blackbox as a controller...
The Acro system is a lightweight system - it is not really suitable for use with a router. What sort of jobs are you planning - this info will...
See this thread also (especially @Rick 2.0's comment in the last message.) 3kW Spindle cooling Alex.
Hi @Dave Dreher, have you seen this thread which might help. Port Disconnect Alex.
Can you post pictures of the problem? Alex.
Hi, - no, I have the duet from Ooznest in the UK. I'm away from home and on my phone - I'll post my macro later if I can, but have a look at the...
The screenshot certainly looks as though it will be much more suitable for cnc - good to see all the 3D printer stuff going from DWC. Alex.
Highly likely @GeoffH - much of what you and Ian have said here has gone straight over my head!:confused::confused::confused: - Family health...
Hi Ryan, I'm afraid I disagree with Geoff on some things - I would very much prefer to use macros rather than have things "hard-coded" - so that I...
It's not just the first year with Fusion, I've only really been using it for about 6 months, but I've had a free license for over 18 months. If...
I think you have to be earning quite a bit before you have to pay for Fusion, so it is worth checking out. One thing to be aware of with the Duet...
Hi Shannon, @Gary Caruso has covered the basics, but feel free to ask any questions about the Duet or Fusion (there are people here who are expert...
Masking tape on workpiece and spoiler board - superglue between the masking tape. Alex.
Be careful with the connectors on the Duet board - they can be delicate. I want to see your config.g file to check the settings are as they should...
