Separate names with a comma.
Some features disabled for guests. Register Today.
The steppers are; 230HS280AW - 175oz -2.80A. Judging by the torque I get on my (leadscrew) workbee I guess the drivers are supplying 2.4A (ripped...
I'm afraid that is the limitation of C-beam - 1500mm is probably too long for the X axis in particular. If you search the forum you will find...
Hi @Benjamin Vg, have you tried swapping motors? If Y axis is OK leave those where they are, but try swapping the Z and X motors. The only other...
Is it the Z C-beam that's flexing, the X gantry that's rotating around the X C-beam, or the X C-beam that's flexing? What tool, feed rate and...
The belt should be OK - brand new machine, but worth checking as it won't take long. Default microstepping for the Duet is 16x - intended for the...
Concept worked - gadget didn't work well enough - plastic not rigid enough. See; Tramming aid Alex.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] For those using an Openbuilds router mount attached directly to a C-beam Z axis with angle brackets. I...
Correct (as always) - my gadget is only for the final check on the router mount to Z axis alignment as I couldn't see how - on the workbee - you...
I will be loosening the screws holding the router mount to the Z axis - can't see from your pic how that works with your set up - on my workbee...
If it works I suspect an aluminium version might be more durable! Alex.:D
The idea is to hold the router mount in position while you tighten the fixing screws after you have trammed it. And possibly provide a...
Not sure how many belt drive machines with the Duet controller there are out there - most people on here seem to have the screw drive, but...
No - a plate that clamps to the Z axis C-beam with screws passing through it to press on the underside of the router mount. A bit like this (if it...
Just printing version 2 - version 1 didn't quite work. Alex:(
I'm working on a gadget that might help with this - I couldn't work out how you could hold the router mount still to tighten screws after...
It shouldn't make any difference Benjamin (the default microstepping should be 16) but try moving the line; M350 X16 Y16 Z16 I1 ;...
Thanks Benjamin, it was particularly useful to comment out the various attempts at calibration. According to your config.g file you had a perfect...
Hi @Benjamin Vg, Yes - I saw that in the video. I've started an e-mail conversation with Ryan - while I'm waiting for his response could you post...