Separate names with a comma.
Some features disabled for guests. Register Today.
Hi @AmirSigns, could you please post a pic of a square drawn with the pen and label the X and Y axes. You should also be checking to see if...
Re controller, Ooznest do a very wide range of controllers, including (as @sharmstr said) the blackbox and duet. They also do the Xpro V4. From my...
Hi @ahojekk, this link is to the mechanical assembly guide for the Ooznest workbee - it includes the dimensions of the V slot and C beam...
Have you looked at this gnea/grbl If you look at the explanation for step port invert, mask it explains how the mask works - it is a binary mask...
Hi @slade2000, as @Gary Caruso and @David the swarfer said earlier - it definitely looks as though the X axis stepper driver is shutting down if...
Is this what you were looking for? [MEDIA] Alex. If it's not I googled "bcnc raspberry pi" and found several links that might help.
If that macro works @fran jackovich, you may be able to modify it to allow re-zeroing your Z axis. Alex.
Another trick - often used in pcb drilling - is to use a tight fitting collar on the bit. If you set several tools before starting a job you could...
The point I was making @fran jackovich is that the new bit you put in will not be at exactly the same Z height as the old one and you will need to...
Hi Fran, can't help you with blackbox or OB control I'm afraid - you'll have to wait for one of the experts on those. Just a thought though -...
It comes straight after the G21, G90 - so well before any move codes. Alex.
Good point, and one I intend to implement next time I wind up my workbee. Thanks Alex.:)
The Duet should support multiple work offsets - haven't needed them yet so haven't found out if Ooznest's implementation works - can't see any...
I ran into a problem recently with the way Ooznest have set up the firmware for the Duet controller on the Workbee. They use (modal) G54 as the...
I have posted elsewhere on the forum about the peculiarities of the Oozenest implementation of the rep-rap firmware on the Duet controller - in...
If your ventilator draws a current of 0.25A then it's resistance is 48 ohms. You have connected this resistance in parallel with the bottom 10K...
@yekcoh was talking about putting the v wheels in the C-beam recess. Alex.
Also designs usually locate the leadscrew or belt drive in the C-beam recess and you can't put everything in there. Alex.
Because we are mainly going for rigidity - the further apart the wheels are the more the structure can resist twisting moments. If you look at the...
