Separate names with a comma.
Some features disabled for guests. Register Today.
Welcome to the forum @3D Cast - you have come to the right place! It isn't just the flex you need to worry about with a length of 2,000 mm. Above...
PS my vacuum makes more noise than my router. :D:eek: Alex.
If it's off in X and Y did you change the offsets in the G10 line to match your probe and bit dimensions? Alex.
A router is probably going to be noisier than a spindle, but the noise from cutting will be higher than either anyway. The Makita has a lower...
Just had another look at the cut that went wrong - it does look (as @David the swarfer and @Gary Caruso were suggesting) as though the X axis...
Can't see how it could be the code if it works sometimes, but if you post your G code here I'll have a look at it. Looking at the cut that went...
Are you planning to run the belt through the middle of that rectangular steel tube? How would you fix it to the C beam? U channel would make life...
Which wheels are not touching? I had a look at your design - the eccentrics you have used will tilt the axes of the wheelsets slightly - if you...
PS - I think the flex in the X C beam is your biggest problem and I couldn't be sure from your video, but it looked to me as though there was also...
One approach is to insert a steel "U" channel into the C beam, but if it is to work it needs to be a very good fit! Or, if you can fit it in, a...
I would expect some flex in an X axis that long @pauna, but not that much! You need to be methodical - start with the router mount, X axis gantry...
PPS: the support you will get from Ooznest if something did go wrong is second to none. They use genuine Openbuilds parts and work to very high...
Yes - the one I have found so far is a bit expensive - will keep looking, might want one myself. I thought about building a combined on/off and...
I have the workbee 1010 leadscrew from Ooznest with the Duet controller. Stepper motors are powerful enough - accidentally ripped an 18mm mdf...
I googled (Google.co.uk), "relay switched power socket" and found this....
We couldn't possibly give you advice on making your own for obvious legal reasons - fortunately there are 230V versions available - try Amazon or...
During the roughing cut I hope - might have spoiled a finishing cut! Alex. :eek::eek::eek:
This chart by the people at carbide is a good starting point. Speeds and feeds Alex.
I had no problem opening the pdf. If you want it to be visible in the body of the message upload it as a jpg. Alex.
I just routed my mains cable for the router above the machine - one day I'm going to arrange a more sophisticated support for it. :D:p:) The...