Separate names with a comma.
Some features disabled for guests. Register Today.
If you follow Tramming: A generic guideline in Step (2) you check that that XY plane is flat. The uprights should be square per (3) to this XY...
Checkout Tramming: A generic guideline Yours looks like maybe either the X-rail is rolled (hard to get wrong on a LEAD as the top L-Brackets help...
False. Wire Y2 in parallel with Z. Enable Autosquare in Web Builder. Simple actually (: Blackbox v32 autosquare (or manual square)
Nearest similar one, then scroll down and customize.
Current settings aren't too aggresive for our motors and our 8mm pitch leadscrews, but you can always lower them as tests Grbl v1.1 Configuration...
[MEDIA] Finish the calibration first. Theoretical resolution is 200 deg per rotation motors * 1/8th microstepping = 1600 microsteps per rotation....
Do you have a working backup off it? If so > CONTROL > Grbl Settings tab > Restore Backup > Select your old 4X backup > Control applies needed...
[ATTACH] Looks like one pulling out a bit there, might be loose, or inserted under (not into) the moving cage inside the terminal (lower cage,...
Jogging is usually short distance unlike a long G0 move happening at Max Rate (G0 moves don't have a programmable feedrate, they honor Max Rate,...
https://www.autodesk.com/support/technical/article/caas/sfdcarticles/sfdcarticles/How-to-install-a-custom-post-processor-in-Fusion-360.html etc -...
You don't seem to be using our Post? We don't use G28 docs:software:fusion360 [OpenBuilds Documentation] Use our post if you need our...
Sweet just making sure we cover all your bases. PSU is more about preventing damage, those motors issues still feel more like a loose connection....
OK, well, that is a weird Macro, just wanted to be sure its not our standard stuff (PS CONTROL really is meant for our stuff) G92 is not what you...
Did you perhaps skip over Step 7.1 of the BlackBox Documentation during initial setup?
CONTROL just sends the gcode along. We don't interpret or interfere at all Do try G4 P5 though (add a space) as a test, shouldn't make a...
A whole lot better thanks! (: Did you check on your Acceleration and Max Rate for the Motor issue yet? If changing the settings doesn't help,...
They also carry NVVV, Meamwell, Mean_well, WEHO and MW. Be Careful! No more counterfeit! MEAN WELL is determined to fight for the trademark and...
Use a computer > CONTROL > Wizards and Tools > Calibration menu You can set where to Home to, but limits are all checked without discrimination...
If they have a years wear on them and not been replaced yet, I would suggest you do. It backs your argument that the issue cropped up now, after...
And did you adjust your parameters accordingly? Might just be too aggresive on the Grbl Settings. If you did, try even lower (half current...