Separate names with a comma.
Some features disabled for guests. Register Today.
Can't comment on 3rd party drivers, but unless you changed the DIP switches, that might be it
Yip, tricky. DXF is a unit aware filetype, but SVG was meant more for print industry than making parts. Accesible for making artwork though so...
plus Hows the brushes in the router? Time for replacement? (They spark more when they are worn down)
Usually fine, but if you have random Hard Limits errors, it could help to split
You did perform step 7.1 (Firmware update) per the BlackBox X32 documentation during initial setup? Grbl settings seems stock standard per our...
You definately will want to replace that LED PSU with a proper one like our recommended Meanwell. Clean power is a must! And a bad PSU will void...
Thanks, keep at it, you should find a pattern eventually. EMI can be a pain to track down - dryer days are worse Review conversation above and...
Correct, can go straight to the PSU's other spare output port. Older video (Before the PowerCase days) [MEDIA]
The FB group is not an official support channel. Please don't engage lengthy discussions, direct customers to official channels as soon as...
NC probe in parallel with an NO probe like ours will show the NO probe as "closed" all the time :) Best to have both as NO probes. If you can't...
SVGs are "unitless" - so check your DPI (pixels back to realworld dimensions) regardless of method / source etc. CAM tries to guess, based on...
Have a read through the FAQ: docs:blackbox-x32:faq-emi [OpenBuilds Documentation]
Could disable Hard Limits as a workaround, or properly fix the EMI issues docs:blackbox-x32:faq-emi [OpenBuilds Documentation] Provided the...
Shouldn't need cooling, just set the Current correctly (:
Well, I am in the southern hemisphere, and the days are getting colder. Took out an extra blanket last night. If we apply the same to where you...
(: Sounds like that was it. The defaults are best.
Checkout around 2 second mark [MEDIA] Its a "computer replacement" You cannot have two hosts in charge of the same controller. Same. Interface...
That is an analog input motor controller. Most laser PSUs of the last decade or so could run off 3.3v PWM as many of the laser DSPs are 3.3v too
Settings good for a Blackbox 4X. So wiring most likely then. Acceleration quite high though, we run around...
Update to the latest grblHAL firmware : Use http://svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox X32 to build the latest firmware and...