Separate names with a comma.
Some features disabled for guests. Register Today.
What do you send? G4 P2 = dwell in place for 2 seconds
Would raise an alarm onscreen. Was there a popup error? If its always the X motor, see docs:blackbox-x32:faq-identify-motor-coils [OpenBuilds...
OpenBuilds-CONTROL/index.js at master ยท OpenBuilds/OpenBuilds-CONTROL
X32 does not need 2 axes firmware. Homing sequences can be set in Grbl Settings now ($44,45 etc) as masks edit: assume you mean 'does not need' (-:
So you say the motor spins. Does the leadscrew spin? Is the leadscrew in the nutblock? Is the nutblock attached to the plate? If the motor is...
See Grbl v1.1 Interface and Grbl v1.1 Commands Apart the command, do you have the queue management, newlines after commands ("$X\n" for example)...
Forgot to tighten setscrews on the shaft coupler?
That sounds correct. Current set a bit high
Checkout the documentation docs:blackbox-x32:currentadjustment [OpenBuilds Documentation]
Check your Grbl Settings : $44=4, $45=3 should do. If not post a Grbl Settings backup for review
Correct Fix in $5 Limits Invert ($5=0 or $5=7 - opposite of what you have now) Did you remember to enable Hard Limits in Grbl Settings NO!...
Review the complete thread, there are in depth discussions on Vectric workflow, Post, Calibration etc. Its already in this thread, just start at...
CONTROL does not support host-pause commands at this time. Some other hosts might.
If you keep it as a Y you can just use the standard Wrapping function in Vectric. Check out LEAD Lathe
Maybe you set your browser to show Desktop site? Haven't been any changes to OB in a long time. [ATTACH]
https://www.wd40.com/products/dry-lube/ is good too
I don't think a reinstall would help. But pausing can sometimes be a bit unstable - some old bug we've been chasing for a couple years. So less of...
Not where it should be :( so its weird Frequently Asked Questions No worries, I work US hours (: 15:00 to 00:00 local time (: still got about an...
OK, then Homing and Max Travel should be correct. After homing, GOTO Machine Zero (G53 G0 X-5 Y-5 Z-5) - you should be just shy of the top right...
but Kicked off with a LEAD1515 profile but lowered the Max Travel values? 1515s Max Travels should be: (Hard to confirm if its a 1515 or not...
