Separate names with a comma.
Some features disabled for guests. Register Today.
A bit OT, but I saw a few pages back that supporting tool changes may happen. I'm looking into modifying @David the swarfer fusion post to auto...
That did it! Thank you! :thumbsup:
I did some more testing and was able to get it to work as long as the touch plate was 1 foot away from the machine. LOL
Hey Guys, I'm having some issues with probing a touch plate I milled yesterday. I have one wire connected to the plate which goes to A5 on the...
Yes. I used his drawings to make the blocks that tie in the bearings to the Y axis plates.
Yahoooooo!
Yes. I posted the link above.
What guys?
I thought I did :)
Not a direct answer, but I just did this yesterday. Get rid of all the circular direction changes by going into your facing op, passes tab and...
Look at Jacobs parts list. Its custom but easy to do.
A couple of us have switched to linear rails. I couldnt be happier. Jacob's who I got the idea from: 1510 Workbee Modified Mine, about half...
I have 2 different amp motors on my machine. Others do as well since Z doesnt need a lot of torque normally. I'd just make sure that if you...
The post processor has nothing to do with the control software. Post processors are specific to their CAM software so doubt you can use the...
You can adjust the current individually, so no.
Sorry, no. I should have been more clear. I mean calibrating your steps. Check out the video below. Or if you are running the OB Control...
Did you ever calibrate your machine? I'm asking because you say that you're noticing it now that you're cutting larger parts.
Here's a good pic of the plates OpenBuilds WorkBee Plate Set
Check your pulley set screws. They may have come loose. The easiest why I've found is to power up your motors (so they hold position). Loosen...
The plates are mirrors of eachother so you can.
