Separate names with a comma.
Some features disabled for guests. Register Today.
Painters tape on the board and the stock. Superglue in between. Google it and you'll find plenty of videos on the technique. Its the fidget...
I think I figured out what the problem is. The macro contents is indeed being saved to the button value. Its a simple fix, but I cant fix it...
That's usually an indication that there is something wrong with the javascript. How did you get the files? Did you download or copy and paste?
Hmmmm. I thought of that, but it didnt work in my case. Let me go try again. EDIT: No, it didnt work for me at all. Maybe you never clicked...
I hesitantly post this because I know the plates are different from the workbee, but conceptually, I believe this is what Rick is suggesting:...
I've reported the issue in the ob control thread so that Peter gets eyes on it. Its here: OpenBuilds CONTROL Software EDIT: I just stalked...
@Peter Van Der Walt Have you seen this? I can confirm its an issue: G Code (G21), XYZ Touch Probe Question
I looked at the code and nothing is jumping out at me as being an issue. Its missing some codes that I normally like to have in my files, but...
Theres lots of ways to do it, but i like to put a piece of tape on the board and with a vbit in the router slowly move z down until the vbit just...
Excellent. Now double check your steps again, then use the 3, 4, 5 method to check for square. Here's another tip. Write down your step values...
The lock collar and nut block sizes tell you all you need to know :)
I've been using Fusion360 for 3 years and have only used a model of my machine/vice once. Its only really necessary if you want to make your CAM...
Nice job! Question about the nut block adjustment holes. I see you can adjust them vertically, but why not horizontally? Am I correct in...
Isnt it empower? Edit: Its is: https://openbuilds.com/empower/ :) Edit the edit: obfuscator :banghead:
Hey Peter. The confusion might be that the blackbox doc and product page only list OB Control. Understandably, but perhaps a note saying "or...
grbl (which the blackbox runs) is mm/min Gcode must set a feed rate or the last rate will be used $4=1, yes, that's a config setting and will stay...
Post your code so we can see what is being sent to the controller. $4=1 is a grbl setting. Its not gcode.
I do remember now that if you start the driver before connecting to the network, you'll need to restart the driver so it uses the new IP. Sorry I...
If the one I posted works as advertised, I'm okay with spending $10 instead of making one :) That's great news about OB Cam.
I happen to be looking into this stuff yesterday and found this: Drag Knife / Vinyl Cutter There's a review of it here: [MEDIA]
