Separate names with a comma.
Some features disabled for guests. Register Today.
Which way does the X axis go if you jog X- (left or right looking from the front of the machine)
When you jog X- should move left Y- should move away from the limit switche to the front of the machine Z- should move down
In config.g you have; ; Drives M569 P0 S1 ; Drive 0 goes forwards M569 P1 S1 ; Drive 1 goes forwards...
Jog your machine so that it is a short distance away from all limit switches (including jogging Z down about halfway). Turn off the Duet. Turn it...
Hi @Gina Botfield, exactly what (if anything) happens when you click on homeall - you answered this while I was typing - I assume you are doing...
You should have copies in both. You can run the ones in the g code folder from the console as G code files. The ones in the sys folder are the...
I am a bit puzzled by this - M564 S1 stops you jogging past X0,Y0,Z0, H0 allows you to jog any axis without homing. If you set M564 S1 H1 it...
Are any of the axes homing (in particular does the Z axis home?) Alex.
When you made the changes to config.g when setting up the firmware did you definitely use the system settings editor to do it and have you...
Ok, your config.g settings are almost correct. Did you change the M564 line? - Yours reads M564 S1 H0 - the default from Ooznest is M564 S1 H1....
PS - welcome to the forum! Alex.
Hi @Gina Botfield, could you please go to settings/system settings/edit config.g in Duet Web Control. Select everything and copy/paste it into...
Hi @Benjamin Vg, the other clue is that your circles aren't round. You have some backlash/play in your machine. Be methodical - start at the bit...
Realistically - about 1/2 that - the top speed on my leadscrew machine is 2500 mm/minute. And then you have to allow for acceleration and...
Blackbox appears to be in stock at the moment, but they sell quickly! Alex. :D
Glad you got that sorted @Xxztrexxx. Alex. :thumbsup:
Good idea - start at the board - you just need to short the two connectors for each limit switch and see if any of the others trigger (being...
Nice work @Colin Mccourt! Alex. :thumbsup:
You are out of my comfort zone now @Matt Thorniley. My workbee has the duet controller so I don't use Openbuilds control software (yet). Try...
Pleased to hear that @Benjamin Vg. Alex.:thumbsup:
