Separate names with a comma.
Some features disabled for guests. Register Today.
Very nice @Colin Mccourt! Alex. :):):)
Don't apologise @sharmstr - the whole point of posting my efforts was so that people like you would chip in with comments that would help me...
Thanks for the response @sharmstr - I understood the first bit and @GeoffH has just pointed out to me that it would be logical to put the tool...
I'm not sure if this is the right place to post this - I am sure someone will advise me if there is somewhere more suitable. This is the start of...
If you are working with wood, @Benjamin Vg, then standard router bits from your local hardware store will do. Just make sure that they have a...
Colin is referring to the build called "The Bee and Me" Alex.
HOWTO Calibrate your CNC Machine for MACH3 or GRBL Alex.
If you have calipers that will measure depth then machine a pocket in suitable material (not wood - acrylic or aluminium for best accuracy) and...
Hi @Benjamin Vg, the flatter and stiffer the base for your workbee the better. 25cm is a lot to hang over the edge of your table - a torsion box...
Don't be confused by my post above - it refers to the Duet controller from Ooznest which uses a slightly non-standard implementation of g-code. Alex.
@sharmstr said "For the duet, a little find and replace magic on the gcode file will sort you." - unfortunately not on their own -the Duet uses...
I don't know - I don't have a black box so I don't know how it handles signals from a probe. On my workbee with a Duet controller to probe is...
Could I ask you to post this in Resources where more people are likely to find it? Thanks, Alex.:thumbsup::thumbsup::thumbsup:
I won't comment on all your post - there are other people on here much more familiar with the black box than me who would be better able to...
Ahh - depends on the make of the flexible coupler - some have a screw which compresses the coupler onto a shaft - mine have grubscrews - two of...
I tested it on a test piece I'm using for my own experiments - face, pocket and contour. I'm heading in the opposite direction - one nc file...
Let us know how you get on @Matt Thorniley. Alex.
It's a bit late to say this now (unless you want to dismantle bits of your machine) but the nut blocks are usually tight when new and the advice...
Works like a dream - I didn't realise you could/had to specify a tool number - just found out how to. Alex.
Hi @sharmstr, I just had a play with your post processor. I'm probably being stupid (won't be the first time:D) but I thought the idea was you...
