Separate names with a comma.
Some features disabled for guests. Register Today.
If you don't have switches connected, you shouldn't enable Hard Limits. Disable in Grbl Settings tab
It runs the extens of the job. MinX to MaxX, and MinY to MaxY For the file in your first post approx X0 Y0 to X220ish and Y130ish in Inch (same...
The 3D View zooms to the Dimension of the GCODE (not the machine)
Loose setscrews on a shaft coupler would do that - as it slips a PRECISE amount - because of the D-shape motor shaft - slipping from on side to...
Just downloaded, or proceeded with the Install too? It is "plug and play" - though if your PC has Windows Automatic Driver download disabled you...
VFD spindles are often troublesome (hard to setup, cheap VFDs lack filtering that cause EMI issues and even damage controllers, not as reliable as...
We highly recommend RoutER11 CNC Kit
Standard post is XYZ only (for years Vectric allowed wrapping around X or Y, its really a 3-axes CAM, not full on 4th like Fusion etc) Vectric's...
Basically all OpenBuilds modular parts are M5 thread: Low Profile Screws M5 (10 Pack) Watch the video to learn where everything goes, what screws...
Normally no grease needed, Delrin is self-lubricating. Some can be a little tight on intial setup, in which case a quick spritz of PTFE/Dry...
Higher precision (with a metal nut you can't have as tight a fit as it has no "give" to the threads, so you'll always have the nut a little loose...
See docs:xyzprobe:wiringgeneric [OpenBuilds Documentation]
(; we don't do useless graphics (; if we add something - it has some purpose (:
To what? That screenshot is taken off the Documentation and shows a picture of the actual BlackBox: docs:blackbox-x32:currentadjustment...
No, flexible couplers are a must. But if the setscrews on the couplers rattled loose, they slip. Just check they are all tight and that the motor...
the printed graphic is the clue - anticlockise = lower, clockwise = higher [ATTACH]
Which CAM? Which Post Processor?
Or loose setscrews on the shaft couplers
Long story short, less complaints (: more experiments. We'd like to reserve our time for OpenBuilds Customer's CONTROL issues and questions....
[ATTACH] setTimeout(function() { $("#portUSB").data().select.val("COM3"); selectPort("COM3") }, 5000); // 5000 milliseconds = 5 seconds...
