Separate names with a comma.
Some features disabled for guests. Register Today.
Very simple: 99% of people have exactly ONE serial port. The BlackBox. Why have you got multiple Serial Devices plugged into your CNC machine...
Most hobbyist machines doesn't bother with it, but nothing stopping you from adding whatever you like. At the minimum for a larger CO2 laser you...
Network scan is for finding BlackBox, not Interface Interface is a PC replacement. Pick one or the other. Do you want to use Interface; or do you...
SD Card is not used (by beginners, you can set aside it for now) Failing to see the port sounds more like you skipped step 4.1 of the BlackBox...
You wouldn't use the old software at all anymore. docs:software:overview [OpenBuilds Documentation] 1) Stock BlackBox wired up as per...
Exactly. No profile yet... Profile sets Limit and probe pin inversions too. In short 1) put aside the Interface, setting up a new machine is way...
Nothing will happen. It can be configured to do stuff - but by default is essentially disabled. Its only checked during boot - so just don't hold...
Reload last good Backup from CONTROL > Grbl Settings > Restore Backup Or if you forgot to take a backup when all was well (don't forget next time...
24V Meanwell Power Supply Bundle
It's a "3v" motor. Once you have it hooked up to a stepper driver (BlackBox or D*542MA or similar) you need a higher voltage (Stepper drivers are...
Turning the BlackBox "off" still keeps the logic powered (over USB) and does not reboot anything. That allows you to "power off" the machine but...
I almost doubt it would be able to, but check the grblHAL wiki. What you can do is disable Hard Limits. Use Soft Limits instead, just using the...
Did you select Custom before or after flashing the 4-axes firmware? If the last time was before, do it again. After reflashing (with the And...
Remember to load a machine profile (or last good Backup). Fresh install of firmware needs to know what machine you have
It will, until you actually set it up as a 4th. Wizards and Tools > Firmware flashing tool > BlackBox X32 tab > Machine Style > 4-axes. Wire A to...
Yes, but that's included with the new Interface
The Old interfaces predate the X32 so get a new Interface too so its plug and play. While it's ideal to try maintain backwards compatibility, a...
No, Grbl HAS TO forget the position on Aborts. Abort is sudden and instant. Position is lost. You HAVE TO rehome. Pause won't, stop shouldn't....
Gcode macros: simply create a file on the USB. Make yourself a Macros folder or something to make it easier to find. Run the macro just like you...
Yes, USB is factory tested (we program firmware over USB as part of factory QA, so definately was working) Driver is the most likely, otherwise...
