Separate names with a comma.
Some features disabled for guests. Register Today.
So much work. You should be proud! side note: The move to position by typing in the DRO bit me in the butt yesterday. I'm use to other...
[MEDIA]
I cant answer all your questions, but I'm happy I replaced my wheels on my 1500 x 1000 with linear rails. They are a pain Not sure how much the...
On my 1510 I found that the gear was slipping on the motor shaft on one of my Y axis. The noise made me think it was the belt slipping. I was...
I had to change the config for my 10" screen. For anyone else who might come across this, here's what I did: [MEDIA]
The fan wont turn on until the internal temp hits 50C: LRS-350-MEAN WELL USA Switching Power Supply
It works fine. There are a few things to look out for. I outlined them starting here: OpenBuilds CONTROL Software If you have any issues, post...
Got it. The M4 bolts I got were a bit undersize, so going with .200" holes as specified meant over .045" of slop. I ended up drilling .171875...
Hey Jacob, Why are your through holes and counter bores so big in your drawings?
Thank you. btw - I was referring to "direction" being misspelled on the board. [IMG]
Sorry for the dumb question, but what's the biggest motors I can use with this board? I have a Workbee 1510 that I'm converting to acme screws...
My switches arrived today. They are nice! Any chance you could post some pics of how you mounted them? Also, in your pics, you have wires...
You dont. Stop sketch, then move them over.
I got all the parts in to convert the wheels to linear bearings and the belts to acme screws. The delrin nut blocks are really nice and fit...
Hey @Giarc . Now that I'm reading what you did, I remember reading that somewhere else before (probably in your build log). Sorry for making you...
Awesome. Ebay has a 10% deal going on today, so I'll get them ordered.
I was just thinking about upgrading mine. I guess my only concern would be the size of them with use on the Z axis. There's not a ton of room...
@Giarc Did you use any lock collars on your acme screws or were the set screws in the pillow bearings enough?
No kidding. It definitely took a while to find and once I did, it took me even longer to figure out that they might work. LOL. I get them on...
@Jacob Lotter - I had a feeling you guys didnt notice the link before. Here they are: 1/2-10 ACME DELRIN NUT BLOCK RH for acme threaded rod...
