Separate names with a comma.
Some features disabled for guests. Register Today.
I used some feeler gauges and got an approximate gap measurement of 5mm. You wouldnt be able to use a 40mm tall bar due to the nuts holding the...
Found it: WorkBee CNC Machine
@GrayUK its a single belt on both Ys and X. I've bought extra belting for the X but havent installed it yet. @MCRCNC While I was taking the...
Its really hard to get a good picture after its assembled because a phone wont fit in the c-beam. These are the best I could do.
The belt lays in the v-slot. Here's the part of the build video showing it. [MEDIA]
The Openbuilds wiring video shows them using the single hole L brackets found here: L Bracket If you have a 3d printer, Ooznest uses 3d printed...
Made some mods to the frame. Details are in the build section.
Go to their Youtube channel here: OpenBuilds®. Click on the big red "subscribe" button on the right. Then click on the bell icon that will pop...
Not yet. Subscribe and click the bell so you'll be alerted when they post new vids OpenBuilds®
That turned out great. Not familiar with Aspire, but does it have a spiral toolpath? That might have reduced the tool marks. Looks great...
I've been thinking about this for a bit now. It never occurred to me to use gussets. I was just going to have a permanent vertical board that...
Thank you for the post. I'm in the middle of building the 1510 OB version and have been thinking about a similar solution for the spoilboard...
Hey Paul, You might want to consider additional drop in tee nuts. The kit comes with all the ones you need, however, if you want to mount your...
I could get my frame square, but not the gantry. I ended up using a shim. [IMG]
@jeffmorris Thank you for the assist. I'll be sure to double check everything once under power (not wired yet). However, the 1510's are belt...
Hey Guys, I *had* some significant gantry out of square issues. See the video below. I went back through and made sure the Y axis C-beams were...
ahahahaha
What speeds and feeds does that doggo use on that bone?
I remembered the second one. Belt tensioning
Hi Guys, Diggin' all the short how-to videos you've been posting. Can I suggest a few? 1 - How to preload the wheels. I think I've figured it...
