Separate names with a comma.
Some features disabled for guests. Register Today.
Misclicked? Touched keyboard arrow? If PC has a touchscreen accidental touch event?
Both those come from your gcode. Origin is set in your CAM workflow, invalid gcode commands come from your gcode. Try the hello world again, to...
Viewer shows the gcode you provide. Perhaps that GCODE isn't 100% Grbl Compatible. Arcs calculating incorrectly could indicate either wrong...
Nothing you really need. Do you like stable and tested or cutting edge
WebBuilder: svn.io-engineering.com:8080/?driver=ESP32&board=BlackBox X32 Flashing tool is in CONTROL under the Wizards and Tools menu. At your...
Yes the version included is what we consider to be current / supported / no known issues / all compatible with CONTROL If you want cutting edge...
docs:blackbox-x32:connect-4-wire-laser [OpenBuilds Documentation]
PE = Protective Earth. Whatever your VFD supplier calls it (: refer the manual
Mains ground (known as EARTH in my part of the world) usually suffices. Wall plug's Earth > PE Screw on VFD > Earth wire and shield of cable...
VFDs are troublesome devices (at least the ones most buy, not the nice FCC and UL certified ones of course). Spacing cables away is first....
Yours still has $44=4 (Z first) before XY at $45. [ATTACH] Our ACRO profile in CONTROL would have set it for you. Make sure your CONTROL is up...
Not directly, but if you really need to, add a gcode file for yourself caled something like G28.gcode and inside just have a G28 command. Run it...
Chat to the store via Support > new ticket
Hahahah sorry - and VERY good point. Should maybe not post that then lol! A-axis it is!
Only be default. If needed, custom compile can set the spare as B or C too
You can run a larger tube, but plan ahead by checking in CAD as you will need to resize the machine to fit the larger tube. Use this as...
PS: If you find even with the Relay doing the switching, that machine still takes a second or two to respond you can add a G4Pxxx where xxx =...
Should be fine on Relay1 then - good luck!
Then RELAY1 will do, its the TOOL ENABLE by default, and what you are doing, is enabling the tool. So M3 starts the stitching, M5 stops it....
Relay 1 = tool enable (M3/4 = on, M5 = off) Relay 2 = tool direction (M3 vs M4 switches between NC and NO to switch the Fwd/Rev on a VFD) What...
