Separate names with a comma.
Some features disabled for guests. Register Today.
They will perform better yes
Yes we just run electron-builder Electron Builder to package.
I don't use VSCode myself, so can't confirm, but glad to hear someones picking up the FluidNC work. Make sure to check the todolist on FluidNC...
They'll work, but be a little slower (higher inductance) and lower torque (based on amperage) than our motors.
Well, your GCODE tells the machine what to do, so if you'd like a review, you will have to include the gcode please...
With VFDs spacing sure helps, but if its not earthed, and the 400hz 3 phase AC is running up a long length of 3 core without shielding. And that...
Symptoms point to either: 1) Forgot to do docs:blackbox-x32:install-windows-selective-suspend [OpenBuilds Documentation] or more likely 2) EMI:...
Personally, i'd hunt the specs before hooking up power. Just in case its, say a 5v sensor, wouldn't want to wire up 24v
Look at it closely for label, or model marking and lookup datasheet to confirm - voltage expectation (BlackBox can provide 5v or 24v, and accepts...
Can be used - "IF" is NPN type: docs:blackbox-x32:connect-npn-inductive [OpenBuilds Documentation] The X32 allows per-switch inversion, so yes....
Settings aren't stored in CONTROL at all Its stored ON YOUR CONTROLLERs EEPROM (:
Sounded like you modified the post. Good then, if you home properly the post and CONTROL will work. Theres another option on the dropdown, thats...
Contact the store via Support to order a cable
Right track with the divider :thumbsup:
Just make sure that 3rd party spindle controller doesnt overload the output, nor backfeed - have seen some ESC/Brushless controllers from the far...
These days apple vs android is no longer a divide, they are both equally evil (:
I hope you didn't edit our Post? If you did CONTROL's Z moves won't work right either. If you did, then either your machines setup is wrong, or...
Use the Dropdown to go via Z Machine Coordinates if you prefer
You must've accidentally changed to "And erase settings" while flashing, deleting your earlier machine profile. Just load it again, CONTROL > GRBL...
No need for stall detection on a properly built machine. That stall could be Wiring: docs:blackbox-x32:faq-identify-motor-coils [OpenBuilds...
