Separate names with a comma.
Some features disabled for guests. Register Today.
Or your phone might be thinking its clever and "saving you" from this AP that doesn't allow its manufacturer to snoop on your activities by...
He made a tonne of edits to the post: [ATTACH] So might explain why we both missed it (; Heads up, rather post a reply - we don't scroll back...
Your laser CAM workflow outputs S-commands that sets the power. S0 for 0% and should be S1000 for 100%. S0 as in "S"-Zero, not as in "oh"
Rather use C-Beam (40x80) - 2060 is not the right profile for such a long span
You can view the signal strength as the Interface sees it in the Setup page, just to be sure [ATTACH] Also, your router might have some useful...
The wheels can handle about 6lbs per wheel - most carriages using 3-4 wheels on a side. Then the max distance is mainly limited by how much...
Yes! We do have a couple specific needs: OpenBuilds-CONTROL/app/js/grbl-settings-defaults.js at master ยท OpenBuilds/OpenBuilds-CONTROL
Just double check you do have $6=1 in case settings was changed without you knowing about something
If the probe LEDs light up too (if its a dead short they should, otherwise if if its leaking just enough to trigger the signal pin but not enough...
Video wouldn't really help The wifi manager is so simple and has been around for years - it itself works. The stack itself is as simple as it...
Anything at all changed in that time? Work on house wiring elsewhere in building? Different PC? Computer with a 2-pin plug that was unplugged and...
You can post multiple pics in one reply (: Some of your attachments didn't work, use the Upload a File button Regardless, not seeing anything...
Setup mode only comes up in Jog mode. It's a 2.4ghz local only AP just to host WifiManager. Pretty simple and always works. Double check your...
When starting the job, your Job tells the machine what to do. Check you CAM setup
fusion360 "top height" - Google Search [ATTACH]
Hard to see from pics. If the PSU ever causes damage, Conucon should be able to assist then
Thats fine. A properly set up vfd will stop at +-3.0v already (10x higher). Setup Min Freq on the VFD itself correctly. Usually for 120hz/7200rpm min
Try Tools and Utils > interface settings > reset wifi
Exactly as the error says. Your Top height is currently set lower than your Pierce height. Set it correctly, Top height must be below Pierce...
AC EARTH (eg spindle body) to DC GND (probe plate, psu negative, etc)
