Separate names with a comma.
Some features disabled for guests. Register Today.
Correct, try that first
What is the value of you $376 setting in Grbl Settings? $376 - Settings_Axis_Rotational Designate ABC axes as rotational by \ref axismask. This...
Yes, but do you have anything wired to the DOOR port? An estop, or similar would count too. Anything wired? Or perhaps nonstandard Grbl Settings?...
Did you remember to Zero the A axis prior to starting the job?
Anything wired up to the Feedhold (Door) input?
Sure its the correct Post? docs:software:vectric [OpenBuilds Documentation]
not at this time. Anything specific you wanted to know more about? Just about everything is covered in the docs docs:blackbox-x32:layout...
Typically they are all terrible. DQ/DM542 are much nicer, not much more Best option though: docs:blackbox-x32:start [OpenBuilds Documentation]
4.2A is the MAX/Peak rating, not the recommended setting. It will overheat and stop working if you run it at 4.2A. In the same way your car...
Double check the S-values in your GCODE - did it send S18000 or S24000 Double check that you did calibrate the 0-10v:...
Jumper only applies to powered switches / sensors
You left CUT DEPTH START "empty" - set it to 0 [ATTACH]
Post the WORKSPACE export for review please. File > Export Workspace OBC.
Alternatively, instead of writing commands, you could modify the Saw Stop macro to be a Press Brake Backstop macro. Getting started with...
Login is for support agents. As mentioned, New Ticket is for you, and then of course just sit tight and wait for the store to get back to you,...
Please contact the store via Support > New Ticket for assistance. Thanks
Someday when you want to play with this bit, do ping in with more info (: Trick should be a) use same origin - for example front left corner -...
As an aside, not tested myself, but theoretically should work: You can also try to add the $32=1 into the HEADER of your Laser post, and $32=0...
That last 10.0 is a multiplier - the default (0-100%) x10.0 which then gives you S0-S1000 So to get 24k you can try 100% x 240 = S24000...
Same concept as the other two then - configure Vectric to output 0-24000 by editing the Post
