Separate names with a comma.
Some features disabled for guests. Register Today.
At a guess without the error, Running a BlackBox X32, and skipped step 7.1 and 7.2 of the BlackBox documentation?
Unable to view your attachment, please try again
Depends on past experience, expectations, etc. But openbuildsCAM is pretty basic and easy to use Load file Select sections and add to toolpaths...
Checkout docs:software:overview [OpenBuilds Documentation] along with the other similar sections in the same category of the documentation for a...
While using the buttons, keep an eye on the Serial Terminal log to see what commands are sent - for your learning odyssey - nice to see how it...
CONTROL's Jogging doesn't use Gcode though, it uses Grbl v1.1 Jogging
Relative, jogging is after all a move from "where you are now"
Exactly. It must flow .... BACK TO THE SOURCE. It can't just seep out into the nearest blackhole, for current to flow the circuit has to be...
So if you doubt the PSU, Then unplug the PSU mains and see if it drops the continuity
Normally no. So, again (last time for me, repeated it enough times now) that is a CLEAR indication that the spindle body is providing some path...
ONLY if EARTH has continuity back to DC GND.
Spindle Speed = 1000. If $30=1000 in Grbl Settings, the S1000 = 100% speed. Not needed unless you want spindle control, can be done once, or each...
Exactly. So on the OTHER end of the spindle body > earth wire in 3 phase cable > VFDs PE terminal > VFD mains input's Earth > House wiring > short...
Multimeter for continuity between AC EARTH and DC GND. Should show open circuit. If not, something is shorting DC GND to AC Earth somewhere Tape...
Easier - for the development of the software yes. Its free software, so the easier option is "better". It works just FINE! But if you need proper...
Better yes, easier to implement - no. For the price, some compromises needed to be taken
Machine profile in Grbl Settings tab? CUSTOM right at the bottom of the list If you mean flashing tool, as David mentioned:
Our free and beginner orientated CAM is super simple and doesn't bother with Arcs. If you need proper Arcs, use a more advanced CAM
That means you haven't Tuned your Max Rate correctly otherwise it would never be a worry: Grbl v1.1 Configuration Our free and beginner...
That's the old 4X Look at the difference: [ATTACH] While it can't integrate with Fusion, you can prep it manually from CONTROL with Macros:
