Separate names with a comma.
Some features disabled for guests. Register Today.
Take the hand torch apart, see where the wires go. The button just shorts two wires together. Same thing the relay will do
Being weaker 3D printer drivers it might just be too weak for the Z axis, or microstepping set too high (higher microstep = lower torque). Might...
4&5 should be the Arc OK signal, not used here (for THC) That's the Inverter, telling the CNC's THC, that the Arc has ignited 2&3 with the badly...
Most plasmas are just an XYZ table, and the BlackBox Relay to trigger the Inverter, so likely yes: See docs:blackbox-x32:connect-plasma...
Yes it is, due to the aforementioned Soft Limits issue with CONTROL Update should be available in the new year. Jobs run fine. Jog distance is set...
Head over to the Documentation link in the menu above ^ Or docs.openbuilds.com
Disable Soft Limits. Not usable with CONTROL at this time, pending a future update
Router within the mount sets back in position perfectly. Tramming is more a case of building the entire machine squarely: Tramming: A generic...
Min Motor Current is 1.7A (for our NEMA17s). Yours is super tiny (1.0A) and not suitable for BlackBox. Use one of our motors: openbuildspartstore.com
Cors thing is just noise (CAM still checking for CONTROL integration to be revisited) Will investigate Monday
Could try adding a "G53 G0 Z-5" before the G0
Any console errors?
To simplify the process for beginners the Free OpenBuilds CAM does segment circles. As you grow your skills we hope you upgrade to more advanced...
No wasn't a setup mistake, just an expired Google Fonts API key.
It will always be negative Frequently Asked Questions Use Work Coordinates instead to make sense of where you are. One doesn't "work" in Machine...
That's about correct - its a 3.3v output. If you set $30=1000, then S1000 = 100% = approx 3.3v Half of that (S500) is about 3.3 / 2 = 1,65v....
Fixed: Just make sure to clear cache/cookies and hard-refresh the page to load the latest code. [ATTACH]
Make sure you have $10=511
Odd indeed as Limits are handled by Firmware not the host application. Double check it still works under CONTROL? Confirm X and Y isn't swopped...
Only available up to 1500mm.... So you go for a 3rd party screw? Its low quality and its calibration is all over the show. You decide to...
