Separate names with a comma.
Some features disabled for guests. Register Today.
I am having a lot of fun building. It is for a good cause and I hope to have some 3D carbon fiber hands in the next few months. But its great to...
What will the build envelope be for your printer? ?
A new pic of the bottom of the printer. As you can see the 26" square glass will go right in the middle. Also the bearing supports are in for...
I put the large gantry plates inside to stop some of the dust frome coming out. It also makes it so the three x plates don't have to be as long
I put the last piece of the machine back together last night. It was basically the undercarriage that holds the scrap board to the machine and...
Another new pic of the build. Its looking good !!! [ATTACH]
Well the machine is on its bench and has started to have some motion. I still have to put the last piece of the frame in to support the cutting...
Hey, any updates on this ?? I want to see this one finished !! Its going to be big
Ok, in between the last set of pictures, the machine was actually taken apart and the 4 main pieces of aluminum were re-cut and we re-verified...
My friend Tim said as soon as you have the beams and screws in 2meter lengths, we will upgrade !!! Thanks Steven
The construction has started. This is going to be a monster. The wood that it is sitting on is 48" square. [ATTACH]
Well that is cheaper but those can only see metal. The orange ones can see glass, metal and plastic
These are the proximity switches. They are all pretty much the same. I use the mechanical ones on my 3d printer. But I figured I did not want...
Got a little bit done tonight. Attached the X Axis Motor, all 4 sensors for X and Y movement. I also installed the drag chain shelf and drag...
So tonight I was able to go to my friend Tim's house and we set up the magic jig that cuts nice and straight. I don't think we cut off more then...
YIKES !!!!!!
Tonight was another good night. After watching my daughters Christmas recital, I had time to come home and do some more work. I was able to...
Tonight was another productive night. When I originally put the X/Y/Z Gantry together, I put it together with MDF. Well my aluminum cuts did not...
. yes, my bad !! 1/16 would be 106. The micro stepping is set on the board. I have a rumba and mine is set on 1/32. found it here RUMBA...
I was just doing some reading. So at 1/32 microstepping the # should be around 212. So if you have it at 1/16 microstepping then it should be...
