Separate names with a comma.
Some features disabled for guests. Register Today.
Check that 0-10v section hasn't been damaged? docs:blackbox-x32:connect-vfd [OpenBuilds Documentation] - Redo the multimeter test as shown with...
Did you remember to Grid screenshot looks like homed but not zeroed (or forgot to jog to where you want zero to be, usually front left corner of...
1) run docs:blackbox-4x:hello-world [OpenBuilds Documentation] 2) keep flipping $3 in Grbl Settings until the Hello World is right side up and...
Just follow the 2nd picture on docs:blackbox-x32:connect-xtension-limit [OpenBuilds Documentation]
that's a 0.9A MAX motor. BlackBox's bare minimum is around 1.2A - it will overheat and stop working shortly - that motor is far underpowered for...
Hold the endmill, give it a firm wiggle (upwards in particular). Ones sense of touch can detect movements (and especially relative movements...
Any recent changes, like installing a new controller, new version of a CAM application, anything at all? Grbl Settings backup for review?...
Probing correct then Can you hear Z suffering, stalling, grinding or anything during Z moves? Anything loose or binding? Z-Axes...
Ordering it one by one could end up pricier than the kit (some kits are priced accordingly, not just a sum of parts). Having three leftover rails,...
If you can still return it (as its on its way - unopened usually an easier return that a few weeks later when its all assembled and then you find...
Checkout 3D Warehouse
Normally no, can hide it out of sight, at the back or something. Power switch is sometimes nice to reach for, and troublehooting LEDs, but not...
To determine if you can reuse your existing motors, check your motors' electrical specs: BlackBox will work best with motors that have 3-6v...
All BlackBoxes has the pins labelled inside next to the interconnect header.... Did you open it up and take a good look? [ATTACH] Even the old...
Available on the interconnect header inside - they are labelled, but note soldering to the backside of the pins does void warranty, BlackBox is...
Update all drivers, all updates to windows. Maybe needs a clean install. Maybe something else you installed recently caused conflicts, really no...
Yes. Order the 2020 kit as is (comes with the longer wires too for your other question) and couple extra 500mm extrusions as needed. All those are...
I'd go for the 2020 :) just a matter of Time before you have a project that won't fit. Otherwise, not much difference, short Y feels more natural...
Checkout the Laser wiring section of docs:blackbox-x32:start [OpenBuilds Documentation] Essentially we provide the industry standard 3.3v PWM...
The "bad" one uses G92 for offsets after probing (good one doesn't probe) - which is not good practice, usually probe macros reset Zero using G10...
