Separate names with a comma.
Some features disabled for guests. Register Today.
Yes, replacing the stock hose for an "anti static" hose will help a lot (search amazon/google for products that fit your machine) Also see...
Correct, thats what the probe does. SIG to GND normally for probe contact, V+ adds 10K pullup on signal line, and positive side of LEDs through...
Router is double insulated, so not the issue then also if it works, not ground loop As for why adding the pull-up power triggers your...
Yes sadly that seems to be the cause then, and per the test, damaged permanently. No CPR will help, short damage usually quite extensive. Do go...
Other than probing machine working fine? Did you go through the GrblHAL settings and set it all up? Movement distance (steps per mm) and...
@danny pearce don't forget to the GCODE file Yes solid catch, that X axis is 10x too fast Is correct, so must be stalling from acceleration, or...
Does it work fine without V+? If so, then thats what your 3rd party controller needs. As per docs:xyzprobe:wiringgeneric [OpenBuilds...
Unplug all wiring except PSU and measure again. Wiring shorts can temporarily shutdown 5V rail, or burn out the regulator and make it...
Limits are 5v, and mounted to moving parts, and can short causing shutdown of 5V rail etc, not just PSU side
Somewhere in that area, machine tugging just right at some wiring causing an intermittent short?
Grbl Settings backup for review please (CONTROL > Grbl Settings tab > Backup Settings button on the main toolbar) (suspect Arc Tolerance or other...
Do an inspection, does the wheels look worm or still in good condition (pictures if you'd like our take on them)
Power cycling clears the error flag, whats not super clear is why the overcurrent condition doesn't trigger on restart, but does initially. What...
As it has multiple motors, and a higher current setting, likely Overcurrent, dial current down a bit and see if it stops happening (motors in...
No, its built into the stepper driver..its last line of defense against driver destroying itself.. It mainly means something is actually wrong...
If its our PSU unlikely to be root cause. Motors ours?
Github.com/grblHAL/ESP32 > look at the BlackBox pinmap and driver files where we do that sort of more advanced things
Describe your issues exactly so we can work with the exact problem and the specific nuances of your situation please
Depends, check their electrical specs, and make sure correctly wired docs:blackbox-x32:faq-identify-motor-coils [OpenBuilds Documentation] You...
Duplicate Issue with sporadic axis warning lights on X32 replied
