Separate names with a comma.
Some features disabled for guests. Register Today.
Might be cooling related (old BlackBox had a little bit faster fan, so try to supplement with a desk fan or replace internal fan) but as it...
That computer very old? Screen so small 1/4 of the right side UI is cut off, might want to use a little better PC to ease the learning curve...
Then I think we can conclude the pin has become damaged. The scary bit is to know what it was otherwise when you order a replacement, it may...
You could use the tool enable signal to an external relay/mosfet/solid state relay/etc - that way you can replace it if it wears out or become...
Skipped section 4 of the BlackBox Docs by any chance? (Driver install): docs:blackbox-x32:install-drivers [OpenBuilds Documentation] otherwise...
Yes, that seems to be inside firmware itself, so custom compile needed and doesn't seem to be an option in WebBuilder...
It is not. You can order one from Router/Spindle LED Light Ring
I think default was 1000 or 5000 - try a EEPROM reset (button on toolbar on Grbl Settings tab) to get all settings back to defaults as a test If...
Apart from the cable, and if the voltage is stable, only other cause might just be that its on its last legs, and time for a fresh new one (: (it...
See https://github.com/grblHAL/Plugin_WebUI for instructions (upload latests index.gz via web interface)
We just use the standard download from https://github.com/grblHAL/Plugin_WebUI when preinstalling, and certainly encourage you to build with any...
Most likely wear and tear item would be cable itself. Might be worth a shot to just replace cable first, see if that helps. BlackBox 4X to...
Not quite https://github.com/OpenBuilds/OpenBuilds-CONTROL/blob/feaf67a433097f467e5933861fa2d2ff082edb4c/index.js#L2769 In laser mode without a...
Can use the same
That's true, but if you do get stuck, shout - might be able to go dig one out for you from the archives, otherwise nearest similar (1010 was all...
- Wifi is off by default (Can be enabled, but not needed. USB is awesome) docs:blackbox-x32:wifi_setup [OpenBuilds Documentation] - Tool head...
Or not EMI, just a malfunction in the circuit, before reconnecting it, do measure for backfed voltage on its inputs (just generic advice, I am...
Sadly no. Just tips for next time: never work with power on (including USB power) around wiring and always double check wiring before re-applying...
Sadly that would be replacement, shorting limits is usually bad (microcontroller, onboard voltage regulators, and several other components at the...
It is just an estimate, machine acceleration means you cant just do distance x feed and figure out how long a job takes. So we do, and then add a...
