Separate names with a comma.
Some features disabled for guests. Register Today.
Did you remember to install Drivers? docs:blackbox-x32:install-drivers [OpenBuilds Documentation] Also see...
The javascript macro just adds a GUI to guide the manual toolchanges, since yours is more automated, you can do the commands in gcode probably as...
So what do you do (other than zeroing) - some non standard machine? I mean we base what we do on the stats from thousands of users, so seems you...
1) Its meant for use with the probe (much better user experience) | 2) Interface's UI doesn't allow for extra buttons for step sizes and the like...
You can move the machine while at Interface. For manual moves, use Jog Speed to lower speed for smaller jogs. For larger moves set Jog Speed...
Interface just sends the commands, so precision is down as good as you've built and calibrated the machine.
See First paragraph, note your symptoms all mentioned
Grbl supports Arcs (G2/3) has for many years. See G-Codes if you need to hand code (IJK format, not R format) Lots of Grbl posts (our...
Not always, neutral-earth bonds in panel can keep the short presenting itself.
1) draw 1 inch circle 2) run it through Grbl compatible CAM: docs:software:overview [OpenBuilds Documentation] If you want to hand-write Grbl...
Fault indicator lit? (all the way up is usually way too high, set current about halfway up (factory default = perfect for our NEMA23s) , all the...
The router mount is always perfectly square to plate (hole alignment and milled edge keeps it aligned automatically in one dimension, use tools...
Home switches = anywhere. Machine zero = at axis maximas for all axes (machine lies entirely in negative quadrant) Work zero: also anywhere,...
Yes!, all our machines are made from components in our modular parts catalog. Longer piece of C-Beam, longer leadscrew - rest you can reuse...
Thanks! OK so with the Minimill, it gets trickier - expansion could be a problem. Because its not a gantry style machine, you can't just extend...
If you let us know We can offer more advise on the other questions. Right now we have no idea what machine you have, so can't tell you what you...
Which machine do you have? We do have Ball-End Screwdriver Set, OpenBuilds 8mm Spanner Wrench and Allen Wrench Set, which should be all you need...
Video of the noise will help us confirm. Binding leadscrews are more of a stall+high pitched whine. Chattering (shaking) is more like wiring....
Are you running the touchoff probe with Sheetcam? (if so, mind if we share your post processor?)
$11=1000.000 ; Junction deviation, millimeters $12=1000.000 ; Arc tolerance, millimeters Should be (from...
