Separate names with a comma.
Some features disabled for guests. Register Today.
Unfortunately, the garden gate became a Thai Story. Which means that the guy who was making it, starting to screw up more and more wile working on...
A vacuum hold down is easy and cheap to achieve with MDF, some PVC pipes and valves and a shop vac. I divided the bed into 4 zones which can be...
I measured the temps on drivers and motors during intensive cutting at ambient temperature of 42 degrees Celsius (!!); the motors didn't go over...
With included tool and bits organizer!:ROFL: Never have to go look for them again…they will be around. Wonder how that will work with the...
Why not make a magnetic levitation track? If a Japanese bullet train can ride on it, why not a CNC gantry? Done with the wheels and dust and...
Hmmm, not a bad idea though. Maybe in combination with side skirts to protect the extrusions from most of the dust, the rest can be blown away....
I found that a dust shoe that big, is less effective in getting the dust out and away. The model I show on my built works great and hardly any...
It's your call. I was thinking, using your machine for production, you would want to reduce down time as much as possible, making the machine work...
Why not replace all with steel V rails? Doing only the top part on the extrusions, might transfer the problem to the lower part enhanced....
Mea culpa, I see it now. So that thought can go out of the window. What about changing to the full wheels running in the profiles? They must be...
If I see it correct, you used the V-wheels on the Y, running inside the profile slots? The same wheels you are using for the X, but there running...
A short Buffalo update: tried to engrave into stainless steel 304 plate and yes, it works! First used a 45 degree V-bit with carbide tip (2...
Hi Martin, That is certainly the plan, a CNC plasma cutter. I'm boiling it at the moment, thinking to use my Buffalo for it and in its place...
Well, a CNC plasma would have been much easier…….. but for a first attempt it turned out not too bad. [MEDIA]
Well, have this project in my mind for a garden gate out of stainless steel 304. As you can see, the image in the middle circle needs to be...
The new vacuum former is nearly ready, just have to get the ceramic elements in. For that I needed to make square holes in the 1mm stainless steel...
Well, the serious short video didn't stood a chance. Hands full with the forming and the cam with stand are still packed away somewhere. Can't be...
The vacuum table is ready, but I made it too big!:banghead: at least for the imminent projects I had in mind. So the pulls gave a lot of wrinkles,...
So, got the probe installed and it works. Have some problems with the software, i.e. it stops at some point in the probing process and retracts to...
Best is to do it through youtube and post a link to that video here. Another one is choosing the "upload a file" option here in the reply box. On...
