Separate names with a comma.
Some features disabled for guests. Register Today.
How would you set this up for plasma configuration? I dont use or need THC, just figure I need a way for the torch to automatically detect the...
So your saying that Probe would not work? With the current electronics I use, it has Ohmic sensing, it simple uses the what you have for your...
I want to use Ohmic sensing so the Z axis can drive the torch down until it touches the plate and then move up to a certain height that works for...
I understand the software and controller works for a router table, but can it do z touch offs for plasma if I use a floating head?
About $4500 without the plasma
You are right, flat plate and spacers would work, a good forming operator can do it, bend allowance has to be exact
I did not run into any collision issues with bolts either, use the correct length of bolt
I would extend the gantry side plates, get the wheels as far apart as possible on the rails to stiffen side to side play, thickness is fine the...
Did you make that plate 1/4" Alum
Looks like you will be making provisions for the slats in the water tray, should work well
Cool, that things is looking dead on!
The height and length can be whatever you want in for the side running lengthwise with the C-Beam, the other will have to accommodate the length...
Ill send the formed drawing soon
If your into building all types of brackets, you can not go without a CNC plasma. The bend radius is 0.0312", should be dead on, the narrow tabs...
It is an absolute must to have fume control, I run it without anything at the moment and my 60 X 30 shop already showing signs of plasma sediment...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] SIMPLE I have been investigating building a CNC plasma table for four years, decided it...
G2 belt, super smooth at all speeds, very happy with the belt. The belt system simplifies the entire build, my alternative would be rack &...
That cutting bed is the way to go!
Sweet Build
This is a very nice outfit, tab and groove nicely done!
