Separate names with a comma.
Some features disabled for guests. Register Today.
What file formats are you referring to?
Can you upload a video please?
Agree with keeping a Microsoft mouse out of the workshop!
Hi Valin6210 When you had that end-mill plow right through the workpiece, did you press "return to zero" by any chance? (The question is only...
What machine do you have Matt?
Quote: It is important to note that currently, this is just an idea, and I do not have the time or resources to implement this project End/ I...
If you're probing off the spoil-board, the workpiece thickness has to be entered into the cam program so it can calculate safe travel moves above...
The machine was making the noise with the motor removed, as per the video, so can't see how the motor or settings can cause it. Got to be...
Sounds a bit like one or more V wheels are binding. I would slacken off all the V wheel adjusters and check everyone of the wheels spin freely on...
Check both the "Y" plates are 90 degrees to the Y axis c-beams - they should be dead square! Then loosen the screws that bind the X axis c-beam...
Is the flexible coupling rubbing on the top of the extrusion cover plate? If so, it may be an indication that the lower lock collar on the...
As Craig alluded to, that problem is practically unheard of. Did you install the T-nuts the right way round? Did you use the correct length screw?
Still looks like Y axis is inverted.
Well, lock collars were used before tensioning became fashionable, so should be ok.
Maybe the cutter is not reaching the edges? There is a limit to the amount of physical travel the router can reach {which must be factored in when...
I made something like in the link below but didn't clamp the pins just screwed them. [MEDIA]
Device Manager Ports Arduino Port settings Bits per Second =115200
...also make sure you have as little backlash as possible in the X and Y axes {well, Z as well of course). At the end of the day, a machine is...
Yes, you should get better than that. Have you followed the calibration procedure? A longer ruler would also help to get it even more accurate.
Wow, thanks Peter
