Separate names with a comma.
Some features disabled for guests. Register Today.
I think I have a 60 tooth carbide in there right now but not sure. I have a similar blade in my chop saw so I might use that instead since I have...
well at that point in the build that I need to get my spoil board down and since I am not using MDF, it's time for some metal work. I have a...
new thought here....if you have 2 lead screws, even if they are being mirrored like they can in the xPro, what's going to keep them from racking?...
hhhuummmmm....I hate being wrong :banghead:
@evilc66 is correct...I looked back at everything and yes you would lose width of the V-Slot x2 for the Y axis assuming they travel the entire...
if the C-Beam is sitting on top of the front and rear rails I don't see how that orientation is going to cause a clearance issue. I can see it...
bits, coatings, speeds and feeds are all good things to have down fairly well before going hog wild. Looking at the first cuts, they looked good...
possibly...since I am still building my machine, I don't know what feed rates I will be able to do but so who knows but I know I will be doing it!...
I am curious about the resolution of the cut and if a smaller/sharper point would create a cleaner cut or less of a burn mark
you have to love what youtube throws your way sometimes. I was looking through my feeds and found this [MEDIA] and since I am going to have a...
something else to consider is how you were testing. For the first cut you used Easel only and a dremel and everything worked fine. Your current...
lol...I haven't gotten far enough to even consider a dust shoe but see how that would keep the chips down. I am going to be making one and am...
I understand it a little better now because I just put my gantry plate on my C-Beam together and see how it works. The mini V's go on the inside...
do you have a picture of this mounted on the C-Beam? I am trying to wrap my head around it and it just went poof
wiring question here. do you need to use (or does it make life easier) a drag chain for the wiring? I was reading on the XL page that there is...
I was wondering if that were the case but didn't have a look at the back of the gantry. I R getting all sorts of ideas for my C-Beam now but they...
very very nice. I think I am going to see about swapping around my Z axis so it faces away from the router on my C-Beam. I am curious why you...
so the router you are getting already has a 1/4" collet so if you got 1/4" bits then you would be fine. If you are going to use smaller shank bits...
do you think there is going to be a deflection issue with the gantry so tall? I didn't see any cross bracing on the uprights and would think there...
hehe...IT had a HUGE box of power cords. Every time they upgrade a computer or display, they come with the power cords and they usually just use...
