Separate names with a comma.
Some features disabled for guests. Register Today.
Not a bad idea, I have the C-Beam XL which fits my needs. It's easy to add a laser onto a good CNC build but its is not easy to add CNC functions...
While I like the idea of having an adjustable Z-axis I am not sure that the 2040 beam can take the torque, and I am sure I would not put a router...
I also want to share how I test the different laser configurations without taking the chance of blowing one because they can get expensive. I have...
You need to look at the details of your board (you didn't say what kind it is) but if you are putting 24V in you are probably getting 24V out....
That laser is not heavy so my I think you could use 12V for the motors. I am using a 2.0W laser which is the same size and I am using 12 volts...
I received the kit yesterday and took a few hours last night and put it together. I did watch the video and followed the steps and it was a VERY...
Well I ordered the 510 package today. I plan on using a 2W TTL diode laser from BangGood, grbl-shield for the control and probably put homing...
I mad a dual purpose fidget spinner, spin it or open beer bottles. I saw the design some time back and can't remember where. [ATTACH]
Thanks for the pointer, half hour after I received it I had it working, and it works great.
Look at the C-Beam LX build guide. I built mine following the guide. I have the X axis plate against the Z axis plate so the whole Z axis assembly...
And I have a bunch of air hoses with 1/4" ends so it should be easy to hook up.
I was just about to place an Amazon order so I think I will add one of these to the order. If it can mist and blow away the chips then I could...
I have cranked up the speed to the point where I am not sure I want to go any more. I started at 8 IPM and am now using 50 IPM. more than 6x speed...
I think we all wandered with the thread, but all is well that ends well -- and no shouting. ;)
Here is what I said For power I use a 2 amp 12V wall wart. I use the CNC Shield - the question is what version of GRBL are you using? For .9...
Well I am making progress as I slowly keep increasing the feed rate. I have doubled the speed that I was working at before. I am up to 15 and...
Hi, as Paul knows I was not ignoring him but didn't have access to the computer for a while. I have responded to him off line and I hope is is...
I have been using .02 I have been getting great results, but would like to run a little faster.
I have been using a 2 fluke bit cutting 6061 .125" thick.
I just checked and the lowest speed for that router looks to be 16,000. I asked because I just build the regular XL with the Makita router and...
