Separate names with a comma.
Some features disabled for guests. Register Today.
First I opened control version v 1.0.309 then opened cam software from open builds button hit browse and proceeded to draw a small box generated...
Hello once again and merry christmas.New update.Did a simple square in cam 10mm x10mm generated g code when i went to type in touch off sequence...
Hey Peter thanks for responding so quickly.Will all the advanced settings show up when a tool path is put into the cam software.Sorry not to...
Hey Peter me again so zeroed the z axis where do i set it up for retraction as now it touches material but stays there
Is there somewhere i can find some some help to set up a plasma cut in your cam software.Do I just highlight the plasma on off box in the...
Thanks again guys but yet another question .The floating head as per the Dr FLO plasma build has a limit switch and if i understand correctly it...
does this mean i dissconnect the gun wire and just run a wire from the cutter to the black box
Recently bought a low frequency cut 50L plasma cutter as recommended from Dr Flo video cannot find any info of how it is hooked up to the black...
Ok peter solved another issue must have been the file size , as we now have a cone.
thanks Peter We now have cone. Must have been the file size.All the while i have been trying with simple files just to see whats going on ....
Ok here comes another.Its a 3d finish cut.
Ok Peter hope i did this right let me know if it all worked.Its just a basic rectangle.
Ok Peter That approach didnt reveal a cone.Not sure where to go with this now.
Okay Peter I was looking at gcode file and noticed it was saved as a repetier -host file.When i double click the file it brings up a repetier-...
Good Morning Peter Simulation mode still not working was wondering is there any other way of turning it on or off accidently in...
It is just a rectangular box for a test file. A little confused if I put a checkmark beside the disable 3D viewer system does that turn it on or...
Looked at application diagnostics today no checkmark beside 3 D realtime job position reviewer .i believe thats what it would show if disabled.....
was wondering if i could set up the probe plus to bypass the bit size as i find that a waste of time, plus when i wish to set up half inch bits...
Hey guys back again.Had mach three before got the black box controller on my new machine.Was running some code and was wondering is there a way to...
Ok Peter ran some gcode of a square with four holes for a test cut ,square came out perfect but when it went to do hole pattern started doing that...
