Separate names with a comma.
Some features disabled for guests. Register Today.
I think that the problems are caused by the green terminal blocks that plug into the drivers. The wires can come off the terminals if they are not...
What about wires coming out of the motor?
My CNC router at the program for mentally-handicapped people have steper motors similar to the one shown in the image. Can wires inside the motors...
Should I replace Delrin Mini V Wheels after using my modified LEAD CNC Machine 1010 for several years? I found out that the router mount carriage...
Today, I finished wiring up the Spark Concepts CNC xPro V3 controller and got the machine working after I did test cuts.
Today, I tested a stepper motor from another CNC router and it worked. I connected new wires between “faulty” stepper motor and Arduino Uno board....
The stepper motor has eight wires coming out of it. Each pair of wires are joined into single wires, turning a 8-wire motor into a 4-wire motor....
I put ferrules on wires going to stepper motor drivers. I did a test run and one of the motors had a mind of its own. I "swapped" stepper motor...
I think that the wires to one of the stepper motors are bad but how in the whole world can I replace the wires? [IMG] [IMG] [IMG]
In VCarve, you can change the start point.
I'll check the wiring on Monday. I'm worried about the wires going into the stepper motors. When I use test meter to check the wires, if the wires...
I have a spare Arduino Uno board to use if the wires going to the stepper motors are good. I found out that ESP32 boards are only 3.3V, not 5V...
About 15 years ago, I was given a Phoenix GS CNC router/engraver with outdated electronics. I replaced the electronics with Spark Concepts CNC...
Today, I have been cutting out parts for small birdhouses for the program for the mentally handicapped people. Since I have to cut more parts...
Do 2.8mm female spade connectors fit 2mm (?) male pins on switches? Gebildet 24pcs 12mm Momentary Push Button SPST ON/Off AC 250V/1.5A 125V/3A,...
Fusion 360 won't import PDF files so I have to export PDF files to PNG files in VCarve. Also, the drawings are not to scale. They are done on...
I downloaded drawings saved in PDF file for Halloween Hearse. If I build the hearse following the drawings, it will be 8 feet long. I want to...
Bambu P1S printer is better than other printers. I have almost no problems with it.
I was cutting some circles that are supposed to be 11.5" but they are 11.75". I measured the 1/4" bit and it's diameter is about 0.23" instead of...
Try unplugging and plugging the USB cable.
