Separate names with a comma.
Some features disabled for guests. Register Today.
When I perform an x-zero, y-zero, z-zero instead of the x/y/z automatic sequence, it wasn't centering the bit correctly over the origin. If I...
Using the Dell laptop, I am able to use most of the functions it seems. Probing appears to be working except that there must be a diameter size...
So they can tell me to do a single troubleshooting step every 24 hours? Ok, got it.
Here we go again with more control issues. I was able to bring the machine to its WCS, start the spindle, and now it says "please wait for...
If all this stuff is this sensitive, why even sell it?
Sorry, I'm not buying this.
Still having issues with runaway axis and button issues with Interface. No VFD involved. Posting so this doesn't get lost in sidebar topics...
[ATTACH]
This issue has been sorted out - at least for now. Suspected DC to AC coupling from the Macbook pro power supply, recommended to use a USB to USB...
Ok, fair enough. The interface should not be malfunctioning like it is. It has never done this before, The most I have ever used it was during...
I was able to get it working. I think. You can't plug it in to the computer, then plug the USB cable into it. Evidently the sequence matters....
Received the USB isolator today. Started laptop, turned on machine, connected isolator and USB cable to computer... OB control will connect,...
I think part of the problem will be solved once the usb isolator comes in…. But that isn’t the only issue. While I am waiting on that isolator I...
I went with the one you recommended. Was just asking to further my own knowledge in case I need another one later on down the road.
Also, if I choose a different USB to USB isolated, what are the specs that I need to worry about? Thanks!
Ok, great. The clicks don’t bother me, it’s nice to hear them so I know something is working. It’s just with the Mac it’s three short clicks and...
Ok, I have located the issue. Stay with me on this... I hooked up one end of the multimeter to the ground on the probe cable. I used the other...
Ok, I’ll see if anything turns up. Should only be a couple minute task since there are only 3 possible sources (each stepper).
if there is a DC ground at the x/y assembly, then I should be able to wire up a simple DC circuit and use x/y assembly as a ground, correct? Just...
Not sure if it was clear, but after attempting to probe, I removed the probe lead completely and set it aside. It was not connected to anything,...
