Separate names with a comma.
Some features disabled for guests. Register Today.
Another thing I stumbled into last night was the use of car batteries in combination with a battery charger as power supply. I like that idea a...
I agree with a dry run on highest speeds to simulate (more or less) the torque on the system. I have nema 23 all around. I read about the issues...
I checked the fastening of the bit, but it was firmly in. I have the habit to check the bit clamping twice before cutting to make sure it doesn't...
I know you're make mounting kits, my friend. However, my 3d printed ABS mounts are solid as a (plastic) rock and up to now I could not detect any...
Well, when the fire started to threaten my home on the range, some discouraging words might have slipped out! :)
Well, threw a plate of 19mm plywood on the spoiler board today in an attempt to cut out parts for a Buffalo Table. At a feed rate of 900mm/min...
Swoooooooossssshhhhhhhhh
Hi Chris, you're welcome. But be aware that this is information from Onsrud, and will probably only apply to their bits. Maybe other brands have...
Thanks for the tip Steve. Mmm, at the moment I have only up cutters reasoning that it removes the chips better, hence removing heat. For cutting...
But your patience will give the greatest satisfaction when you receive it and can start printing all the ideas you've gathered in time! :D
Maybe a separate topic? Like "Pimp my OX"? LOL
The MSDS in your link of the Alumilite Clear says it is of the Polyether Polyol chemical family. So if they broadcast it is an urethane, they are...
Also designed this little slide in tool holder for the router bits. It goes on the front of the Buffalo, where the tool change area is. Can add as...
Personally, weighing the bolting, filling with resins and the ABS connectors I come to the conclusion that the resin solution has too many...
Hi RogueGeek, it is not urethane based but made of polyols (or is that a kind of urethane?). According to Wikipedia, it seems to be more some kind...
Serge, I'm quite happy with what I can do with a 3d printer (although the printing volume is only 150x150x140). If the choice was spending $ 300...
I don't like the MSDS of the Alumilite. http://www.alumilite.com/MSDS/Alumilite%20Black.pdf
Yep, you're right! For the bonding and the application of ABS.;) Bonding to anodized aluminum is quite some operation and preparation. Wonder if...
"Would the 6,000 psi tensile strength rating (click for one type of alumilite specs and cost) be plenty ?" I have no idea. I think it is possibly...
Thanks, that is something I can work with!:) I found some info on the web about max speed for a given nema stepper. In my case, with 12V power...
