Separate names with a comma.
Some features disabled for guests. Register Today.
Just hooking up my spindle LED. Followed directions. I get continuity from the end where it's plugged into the PSU to the posts on the back of...
Like so: [ATTACH]
So, like this: Seems like I dont need the capacitor since you have the pull downs on the blackbox board. Correct me if I am wrong
I have a very tight space, and at a different direction where the xtension switches won't work. Hence, the creativity. Inside a C-channel is the...
I've searched so many threads, with so many different opinions on grounding, creating a grounding loop or not, etc. Long story short, I'm...
I couldn't agree with you more and don't get me wrong, I am a huge fan of the Openbuilds ecosystem, products, team, etc. I just want to keep my...
Does anyone have any experience plugging in a LaserTree 20W into a Blackbox X32? Any troubles? I have a modified metal Ox, all on lead screws....
As always, thank you for your detailed response. I will check everything again tonight. Based off what you are saying, it feels like gravity is...
Okay, so if I had a 1/4 end mill it wouldn't jog as much as it does for a 1/8 end mill. That makes sense.
What's this line of gcode doing in the macro? [00:48:05] [ G0 Z14 ] ok [00:48:05] [ G0 X0 Y0 ] ok [00:48:05] [ G0 X4 Y4 ] ok [00:48:05] [ G0 Z1 ]...
I used the same settings for all 3 axis', you are absolutely right, I didn't calibrate it like I did the X and Y axis over 600mm. These are all...
Just from reading tons of speeds and feeds documents, the general guidance I have seen is just leave it on 1. That's 16000 RPMs at its lowest...
Yea, it actually wasn't exactly on 600. So it pushed it a hair to 600. I did this on interface vs the computer too, which you know you can't...
Yes, how do I do that. I have another thread talking about calibration, but here's a video of the CNC measuring across 600mm accurately. I only...
Probe video: [MEDIA] Calibration video: [MEDIA] It's almost like it centers itself where it's supposed to be hovering over 0,0,x, then jogs right...
I used a precise 600mm Shinwa H101-E ruler down the x and y axis. I setup a precision 1/2" brass depth block exactly at 600mm. Placed a blank...
I just ran a return to zero command after running my Interfaces xyz probe check. It dug into my surface. I had been wondering why all my first...
I just found the automatic probe function in Control. First, way cool. Second, does anyone know if Interface will get the same feature? I hate...
I realize the previous page spoke about long-file names; my question is about short file names. I thought I would outsmart Interface by just...
Did you fix it??
