Separate names with a comma.
Some features disabled for guests. Register Today.
Hi Guys. Update. I wired in 100 MFD caps and 4.7K resistors according to the diagram here . [IMG] Thus far I have not had any false triggers on...
This is very helpful. I will wire it up and try it out.
Thanks, Peter.
Appreciate the input Peter and Shawn. I'm using the open builds limit switches which require +5, GND and provide a signal in return. It's unclear...
Thanks for getting back so early in the morning! I 100% agree that fixing my EMi is the way to go. I have a pretty simple setup with just the...
I have an openbuilds leed machine with which I'm trying to get lightburn to work. Flashing my Uno with Openbuilds Control has me moving but I need...
The other thing I see in the header is config.h which might be important is define DISABLE_LIMIT_PIN_PULL_UP Here is the text: // By default,...
Still trying to sort this out. I've been into the weeds of grbl's config.h. There is a setting define ENABLE_SOFTWARE_DEBOUNCE "A simple...
The switches all have 5V and the embedded LEDs fire appropriately when the switch is actuated. There must be something in Estlcam's GRBL...
I'm using six open builds limit switched Xtension Limit Switch Kit with an arduino UNO running GRBL 1.1 and a standard GRBL pinout. I bring two...
If you are putting two limit switches on each X, Y and Z it hurt anything to have two SIG coming to the same switch input?
