Separate names with a comma.
Some features disabled for guests. Register Today.
When you close a Vcave file, it will not close without asking you if you want to save the file. It may be that your Vectric CRV file (.crv) was...
The Openbuilds post processors require that your machine is homed at start-up for the day. That lets the machine know where it is in the Machine...
I use two mounts. One up towards the top and one at the tool end. It works great for me.
Out of curiosity, and it probably shouldn't matter since the gcode should cause it to cut in mm, but is OpenBuilds control set to mm, or inches...
C): the z-1 is the first Z move. If you open the gcode file in a text editor, you will be able to see that later on, it caves to a depth of Z -...
I am confused by what you mean when you "flipped your Z". When you home the machine does the x axis move to the right (X + direction) until it...
There are legs here and mounting plates if you want to build it similar to the OpenBuilds Acro. ACRO Plate Set If you are looking for other parts...
You said you have a 15mm thick probe, but you are using the OpenBuilds Probe settings which is for a 9 mm thick probe. Therefore the machine...
Here is a video, docs:xtensions:limits [OpenBuilds Documentation] And how to connect them. docs:blackbox-x32:connect-xtension-limit [OpenBuilds...
Did you remember to home the machine first to establish the machine coordinate system?
The industry standard is far right corner which is why it is mirrored. You need to change the grbl settings to what your machine does then save...
You enter in your X, Y, and Z maximums in the GRBL Settings then save them. On a custom machine, you may have to home it, then jog to all the...
This project was basically done for fun, and because I had not used the CNC Lathe for awhile. That, and one of the two may be used as a gag gift...
That is very sharp with great contrast. Did you add anything (borax) to the wood? Or is that straight form Lightburn?
If you want to spend the money, Vcarve will let you choose either X or Y axis. [ATTACH]
That is actually an OpenBuilds Ox. An oldie but a goodie. You probably have either a loose wire on the stepper motor(s) if it only moves...
Here are links to the products High Z Mod for Lead 1010 CNC LEAD CNC Machine 1010 (40 x 40")
I forgot that this guy lent a helping suction cup hand. [ATTACH] [ATTACH]
As I was ordering more parts to both upgrade my k40 laser and to finally finish the Acro I started years and years ago I stumbled across The...
That is weird. When I look up the Post Processor in Vectric V11 on my machine I see this: [ATTACH] I believe it was the default. I modified my...
