Separate names with a comma.
Some features disabled for guests. Register Today.
great. why to home Home, Fusion360 and G53 Z moves how to calibrate HOWTO Calibrate your CNC Machine for MACH3 or GRBL the wizard makes it easy,...
calibrated? use the wizard in CONTROL max rates and accelerations? if these are too high motors will make strange noises and will not go...
Y gantry squaring is a compile option in grblHAL, no need for external hardware, but if you are placing 2 accurately positioned limit switches you...
it is possible but it is a pain in the butt. much more effective to use a home limit switch on one side backed up by hardlimits. you can mount a...
we do recommend using our OB post for GRBL based machines just in case you are not (-: docs:software:fusion360 [OpenBuilds Documentation]
you would have to write your own 'control' unless your vision component can be written in javascript and added to CONTROL as a macro, or it might...
I would do a finsih pass, slotting is always a problem since the cutt is cutting on both sides. For the roughing add 'radial stock to leave' (in...
you can do that by attaching the vision system to a (PC/Mac) and programming that device to handle the vision inputs (and the trigger, and...
do keep in mind that jogging in steps happens at rapid feedrates while continuous jogging happens at an adjustable feedrate, unless the team is...
I see what you are saying, you are trying to use the Interface to do 'manual milling' for which you need precise steps per button press. The...
I think you are trying to connect the Interface via USB to the computer, this is only done for setup. For the PC to control the machine you...
indeed, you cannot have cutter comp in GRBL, it might come to grblHAL in the future, it has been discussed but I cannot find anything that says it...
180 arcs do work in GRBL but as they get smaller you need more and more precision in the end points and center offsets. SketchUcam does use 180...
my own experience with USB via UTP extenders comes down to 'do not bother' though a good brand one that is powered may work just fine. The one I...
don't use R format arcs, use IJ instead, and note that X,Y,I and J must be present on all lines. and, don't do arcs longer than 180 degrees....
[MEDIA]
well, you do have a very old version of the post, but there was an issue with converting the property value, seems to have been introduced by...
open your postprocessor .cps in notepad (must be post version V1.0.42) go to line number 1262, which is between these lines if...
press CTRL and - to shrink the contents of the display, just like in a browser. CTRL 0 to returbn to normal, CTRL + to make it bigger
please confirm you have V1.0.42 of the postprocessor as line 1987 is not a .format() call so I am a bit confused (-: thanks
