Separate names with a comma.
Some features disabled for guests. Register Today.
T That's truly a function of how much load you intend to put on it and how much deflection you can accept. It is unlikely to fail, just merely...
The video shows it being used with a shelf at around 1:15 [MEDIA]
Honestly, I'd just drill a 5mm hole down through the center of the upper extrusion and put an M5x25 screw through it into a t-nut in the channel...
What are you seeing that leads you to believe this? Maybe an international internet or shipping limitation? They are readily available on Amazon...
Did you reverse one set of the Y-axis wires? docs:blackbox-x32:connect-nema23-reversed-y2 [OpenBuilds Documentation] With belt drive systems you...
Check with @Chris Laidlaw for custom plates. Not cheap but does good work.
You might look at integrating accordion bellows into the system. Perform a forum search for suggestions. As for a source, this post should be...
Hard to say but easily resolved by process of elimination. Try a sharper bit. And you've still got room to gain more rigidity. Spread your X-axis...
Generally anything from StepperOnline is solid and reliable. Digital Stepper Driver 1.0-4.5A 18-50VDC for Nema 17, 23, 24 Stepper Motor -...
V-Slot was created by OpenBuilds owner Mark Carew a little over 10 years ago and brought to life through a KickStarter campaign. As a firm...
If you need round,4-Pack Durable Silent T8 Lead Screw POM nut Lead 4mm Nuts for Ender 5 Pro Plus 3D Printer, CNC (2mm Pitch 4mm Lead): Amazon.com:...
Search around. Delrin (POM) nuts in the same style as the brass ones are readily available. You'll just have to wait awhile for them to arrive.
The free-spanning side rails of the Lead 1515 make it less than ideal to extend by any significant amount. The longer the span, the greater the...
I think Peter is asking what have you done up to this point. Do you have lights on the BlackBox, does the control software show a connection to...
That would be a calibration error. Please check the calibration on your system. Nope. Forum answers are provided on the forum for all to see....
Autostart as a background service is a requirement for the APIs to work correctly. The annoying notification popup is easily disabled by clicking...
Sorry, I got the 1mm washers backwards. They should be between the 6mm shims and the wheels as shown. [ATTACH] The bolts are 65mm and you need...
If you're referring to the standard X or Y gantry stack, there is a 9mm spacer between the wheels and a 6mm spacer each side outboard of the...
I'd rotate it 90 degrees and have the side rails climbing the side walls. Keeps them out of the way. Also means your cross beam is shorter which...
I probably wouldn't go the route of the one shown in the photo. The cantilevered setup creates a lot of mass and subsequently inertia that has to...
