Separate names with a comma.
Some features disabled for guests. Register Today.
are you using a vacuum for dust extraction? vacuum hoses generate static electricity, but it does depend on atmospheric conditions, so you may...
added to my ever growing list of videos to be made (-:
having calculated or measured the offset I would create 2 macros to move back and forth between the 2 tools. lets say the laser mounted 3.2 inches...
CAT6 has a good chance of working because it is shielded twisted pair.(with extra space between pairs caused by that + shaped insert) Cat5...
X and Y are supposed to move independantly so I am guessing you mean Y1 and Y2, the left and right sides of the gantry. First make sure they are...
no there is not. The Blackbox has motor drivers built in, just use them.
basic math, really.... 200 motor steps per rev * 100 (gearbox) * 8x (microstepping default in X32) = 160000 steps per rev on the axis 160000 / 360...
I agree, but changing it to a G21 G90 G53 G0 Z-5 may not work for everyone (though it should since we encourage everyone to use hard limits and...
then how can is know to run in reverse? you will have to connect relay to give it direction. This is not a SOFTWARE thing, it needs real connections
our post for Fusion360 now includes basic probing and I am scheduled to work on the more advanced probing 'real soon now' (-:
the calibration wizard is correct and accurate, I would trust it rather than theoretical calculations. There are resources on these forums that...
there is not currently such a setting but I am busy adding some stuff to the post so I can add that to the post settings.
import it into fusion360, convert from mesh to solid, apply paths in manufacturing, post gcode (using the openbuilds post! link in my signature below)
you don't, you let the CAM do it for you by selecting 'coolant on' for the tool. Then the CAM will insert the codes for coolant on and coolant off...
use the coolant output docs:blackbox-x32:connect-coolant [OpenBuilds Documentation]
from the direction of cuts and orientation of the part there is definitely backlash in the X axis. why it is speed dependant is probably due to...
the file name and extension do not matter at all, Gcvode is just plain text. What matters is the postprocessor, you must use the openbuilds one...
The $ is used in defining the paramerter number in the GRBL firmware. You need to read the WIki! Grbl v1.1 Configuration
so the wireless relay forgets to stay on when the power is off. Nothing strange there (-:
set this as the offset from 'material top' in the top height setting in the heights tab. the surface of the material is Z=0. This is set this way...
