Separate names with a comma.
Some features disabled for guests. Register Today.
thanks, ,.looking at the J we can see that the head is cutting left to right and moving bottom to top to do the curve, then X stops moving and Y...
slow it down more (half the maxrate, and half the accdeleration), the jog is not at full speed, but G0 moves are at full speed, and clearly that...
puty a 0 in the blank field, then save
G53 commands operate with reference to home and add to that my apologies, I missed the randomness of it. random movements imply EMI or other...
some Gcode moves are relative to home, that is why homing is important, as explained in the 2 links I gave you
The machine needs to be homed before you run Gcode. Either homed with limit switches or use the 'fake the home' method if you have no switches....
only jerking in Y- direction as far as i can see, other curves are just fine
the above means you have the old version of the postprocessor you need at least v1.0.42
15m with the right cables will not be a problem. wifi WILL be a problem, the slightest glitch will cause sync errors and the gantry will twist
some do, some don't. Tormach is commercial, so it Millright and they both have conversational interfaces.
most commerical cnc come with 'conversational programming' built into the interface. Notable is Pathpilot built on top of LinuxCNC on the...
dial down to 8x microstepping, you don't need more than that. then you will be able to increase the acceleration and max speed too.
I am wondering what causes this diving that makes antidive necessary? (is it some fundamental problem with the THC?) do we know for sure that we...
you dont actually need any of this, run without a machien profile.
1mm , if all goes well, try 2mm 33% 18000rpm set by selecting a 0.05mm feed per tooth 75% of feedrate conventional, plastics generally prefer...
you MUST 'fake the home' How to 'Fake the home' you must also calibrate the machine, setting zero, even homing, is useless if it is not moving...
is CONTROL running? you should see the gearwheel icon in the taskbar.
plastics don't like climb milling, foamed plastics even less so.... I posted about this, with pictures recently.... OpenBuilds Sketchup videos.
the BlackBox has 2 outputs for laser power 5v PWM 0-10V DC which one does that control board need? connect that one (-:
[MEDIA]
