Separate names with a comma.
Some features disabled for guests. Register Today.
no, 4 miles is too far, and as Peter said, never leave the machien unattended.
that pattern is mesmerizing
you MUST home the machine, either with the homing limit switches and press the Home button in CONTROL before setting up to cut, or by using the...
on the other hand I am absolutely sure which postprocessor is better for plasma, our Openbuilds post is the one (-: The stock one is not good at...
in general this is a bad idea CNC cutting needs relatively slow speeds and *power* to drive the tool through the material laser/3D printing needs...
Linux is not the problem, the Mega256 is the problem, CONTROL is designed to work with *stock* GRBL 1.1 on an Arduino Uno (as in the Blackbox 4X)...
this is a community forum. if you wanted support for the Router11 from the store then you should have contacted the store (-: also, many forum...
you have backlash, ie, something is loose, find it, tighten it (-:
turn off laser mode! [ATTACH] set laser mode to disabled click the save button at top left (it will change color when soemthing needs to be saved...
I use a fishing spring balance to set the tension exactly like this [ATTACH] too loose is worse.
OpenBuilds CONTROL is designed to work with GRBL 1.1 for Arduino Uno (that is what is in the Blackbox 4x, Atmega328p processor) and grblHAL (the...
your belts are probably not tight enough. I use a fishing spring balance to put a known 12kg of tension on my belts. due to your machine length,...
seems to me it is time for you to go to a water cooled spindle since you are running your router for long perioids, killing a router in a year...
a temporary 'not supported', it will come back....
in the footer of my messages is a link to the only correct place to get the postprocessor (-: the text 'GRBL post for Fusion360' leads you to...
are you sure you are using postprocessor version 1.0.42 ? line 1136 in my file is a 'writeComment()' , what have you got?
did you update the firmware in the Blackbox?
not enough coffee.....
on opening the file I notice that the penetration points are in the material you are keeping. ie the little green lines are in the part not in the...
why not let Fuision generate Gcode for you? it is very good at it and our postprocessor is tuned for GRBL controllers. You can just use the...
