Separate names with a comma.
Some features disabled for guests. Register Today.
If you vary the input voltage, you can probably use that 6" board on eBay and limit the current.
One thing to be aware of with heated beds... Neodymium magnets loose their hold at elevated temperatures. I'm talking in the 80*C range, they are...
M3 x 8 flat head M3 x 6 cap head
Put it on a pedestal. Electronics underneath with a fan if needed.
This thing is going to look wicked, Kiza! :troll:
Thank you, Eychei. I am trying to source the 2mm id and 3mm od PTFE tubing.
Thermo, which tubing did you start with? How did you machine the tubing to fit the 3DS parts?
The Ekocycle product specifications only lists 200um layers.
I've been giving the bed quite a bit of thought recently as I had the surface fail over the magnets. The stack is likely 7075 aluminum with what...
This is the link to the Ekocycle data. Support | EKOCYCLE | Supplies | 3D Systems They are saying it only has 200um capability and the filament...
1.0 accepts any cartridge anywhere.
We have a life outside the forum? :zipit: There is an option brought up early in this adventure. People were trying to cheat the system by...
If you are looking for overkill... I mean multiple heaters... Mean Well SDR-480-24 24V 20A Single Output Power Supply 480W | eBay These are...
For the 100%, you need to go back to stock driver and then re-patch when your initialized your new cartridge. Zero percent... maybe someday :)
Which tom??? :rolleyes: <<<=== not the FW guy.
The patch is of no concern, of course. There is a sensor in the print-head that is seriously sensitive to any sudden change in feedback. I...
Enjoy :)
Very unusual. Glad all is good.
Those bins are in there very tight. If yours is no longer tight, it may have broken the catch. Otherwise, it may be that you are not providing...
Find yourself some nice flexible 16-awg wire (high strand count silicon test leads) for the heater pad.
