Separate names with a comma.
Some features disabled for guests. Register Today.
That could well be the problem - nutblocks are often stiff when new. I use a battery drill to grip the leadscrew and run the leadscrew back and...
Just to confirm your answer to my previous question, does the motor turn if you take it off completely? If it does can you turn the leadscrew by...
Does the motor run if you remove it from the leadscrew? Alex.
No video uploaded. If you can, show us a video of the connection between the motor and the leadscrew when the motor is turning. Alex.
What toolpath are you using - the facing toolpath in Fusion always starts outside the stock box dimensions. Use a pocket toolpath. Alex.
Thank you Peter - that was it - big fingers, small screen - I was totally unaware that I had done that. :banghead: Alex.
When I log in to the forum on my PC or my phone I (until yesterday) get different formats. Yesterday I started getting the PC format on my phone...
No, only issue is if your probe shows as triggered when it shouldn't do. This can happen if you have accidentally connected any metal casing on...
Check that your new spindle really does have a connection between pin 4 and the spindle case (cheap chinese ones often don't) One thing that might...
Do you have normally closed or normally open limit switches? Where there any error messages? Alex.
You are very welcome - it's what this community does. Alex.
My nut blocks have lasted over 5 years with no sign of wear. Alex.
Upcut will pull the chips out of cut area - especially important if the cut is a slot. The last thing you want is the cutting area clogged with...
Use an upcut bit for a first toolpath leaving some stock for a finishing path with your compression bit. First toolpath use a stepdown equal to...
The first thing to check is the wiring to the stepper motors. If there is one loose connection movement will be erratic. Alternatively does it...
@Nephsol, it would help if you could upload your Fusion file so we can see exactly what you have done. Alex.
