Separate names with a comma.
Some features disabled for guests. Register Today.
I've used a 'spotting' drill for this in the past on my spindle machine, but I guessed that the question was about plasma - @fflen Can you confirm...
In addition to Peter's request: What program did you use for the CAM (to generate the GCode)? What operation(s) did you use for the machining...
Sounds like HiFi - Guitar amps were my diversion a few years ago :confused:: [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] The middle one was...
Jeepers! Does Dr Frankenstein know you have it? :D An impressive collection!
I like the valve (tube) tester on the shelf above :)
Just to clear up one thing: The 'Interface' is not a controller - it is designed so that you can send commands to a controller (e.g. the X32)...
I'm no expert, but I don't think that will work: The VFD needs to 'lock on' to the voltage / current feedback from the motor to determine what the...
Have you got the latest version of the post processor? I seem to recall a similar error message appeared after an update to F360....
If you look at the code, the non-circular part of the cut has ~700 points! It is just overloading the controller. [ATTACH] (From NCViewer) What...
There is a macro for Control that adds that sort of functionality: Getting started with Javascript Macros in CONTROL / Library of Macros created...
Thank you very much, Peter! :) I called it 'shell', but some people call it 'Mother of Pearl' - same thing. Just for posterity, it's worth...
I used a 0.6mm diameter end mill to cut inlay pockets in ebony for a guitar fingerboard. Feed rate was 125mm/min (5" / min) @12000 RPM (the...
True, sorry.
No. The DRO reads WORK coordinates - it can read pretty much anything after homing. If you hover the mouse cursor over the DRO numbers (in...
Just scroll back up a few posts and ***CAREFULLY*** follow the advice of @David the swarfer It's not the software.
Still works for me...? (personal version).
A fairly recent update to Fusion changed a lot of the manufacturing settings, and as a result, some defaults got lost - might be the case here....
IME, the resulting solids are faceted and are an absolute PITA to work with :(
If you have a 3D mode of the machine, it's not too hard to set it up as a F360 simulation model (if nobody else has done it already). I did it for...
My impression is that the machine was being overloaded and skipping steps (so it could end up anywhere!). GCode can work in both incremental and...
