Separate names with a comma.
Some features disabled for guests. Register Today.
If I try using the GoToZero XYZ, it tries to push the bit through the spoilboard. If I attempt to use the Spoilboard Wizard, it goes past the...
Yes, the Zeroing Plate I have is 2" in diameter and the cutters are what is contacting the Zeroing Plate. They are only protruding by 1/16" below...
Everything was Calibrated over a month ago, the only difference this time was that I moved the mount for the Spindle downward towards the...
Whenever I attempt to use the spoilboard machining wizard, regardless of what I attempt the Z-Axis lowers further than what I enter in the wizard...
Instead of 500mm 's. for the uprights I made mine 700 and I increased the Z-Axis to the same. Just had to cut down the length of the Leadscrew...
I just used longer uprights supporting the X-Axis along with a longer Z-axis to compensate.
I was finally able to get it to work correctly. Seems I for got to Zero the DRO's on X and Y. The Probing of Z worked great, the only problem I...
That's what makes no sense as Max Travel on X is 720mm, Y is 320mm and Z is 60mm and the project is supposed to be 154.6mm on X and Y with a...
The error message that I am getting every time that I can't figure out is this one. Error 9: Gcode locked out during alarm or Jog State...
Has anyone had any issues using the Metric VCarve Pro Post Processor? I added it to the Vectric Photo Print and when I initialize it on my...
I understand that, I was just enquiring on what kind of cutting speeds others were able to obtain.
I've finally got my C-Beam XL up and running and as I'm not familiar cutting using the metric system. What is the average cutting feed rate that...
I have it and it was difficult there was a video on YouTube to get around it. Though now I am typing this on a Raspberry Pi 400. Booting off of a...
I got it from here: Setting up a Raspberry Pi - Windows IoT Systems on the Raspbian Page.
I was running it through Internet of Things version of Windows 10 on my Raspberry Pi 400 with booting from 256 GB SSD.
TRy SharpCNC Commander if you want to use a commercial looking CNC Control Software.
That's what I assumed it was after checking the GRBL settings file. Apparently, after a recent update my GRBL Settings profile had somehow changed...
Here is a picture of my Home Switches,
I'm inclined to think now that the Offset after hitting the Home Switch isn't large enough. The Switches seem to need more than a 20 mm Offset...
If it were wiring it wouldn't recognize the original Y-Axis Home Switch.
