Separate names with a comma.
Some features disabled for guests. Register Today.
Nice! Planning on doing the same with mine. My main issue is the bed shaking/racking at higher speeds because of how the belt is attached so far...
I am in the US but not in the 48. Mostly it's an issue with a 5-6 foot thin rod going by airmail. UPS and similar will be very expensive. If 2...
Looks great! I've been considering a belt or chain drive system for my next build as it's almost prohibitively expensive to get a 1300-1500mm ball...
I agree that the design of the base leaves a lot to be desired. I was thinking or incorporating a design similar to the Sphinx, and maybe removing...
Yes, just like the LEAD machine.
If you use the xlarge c beam plate, you can face the x axis lead screw away from the cutting area
Solidworks competing with Autodesk Fusion 360 Hopefully this helps, basically you can get solidworks 2018-2019 educational edition for free right...
Looks great! So from what I understand, you used your old machine to basically mark the centers of the holes and then finish drilling with a drill...
looks like you can order them from the spark concepts website, release date is the 17th so not that far away
So these can still control external drivers? Sorry, I couldn't see where the pins or solder points were for external drivers.
[MEDIA] Jump to 2:10 for a look at how it works, kind of satisfying to be honest.
The standard nema 23 on the openbuilds partstore would be the biggest I would go, since these would underdrive those motors by a little bit. If...
Looks beefier, I like the replaceable fuses!
This is just me speculating, but if you put the eccentrics on top, you are more likely to misalign/tilt the x gantry than if they were at the bottom.
yeah, it's actually the delrin nut that is out of alignment, I had the same problem on my x axis. just loosend and hold it in place when you...
Theres a few things you can try. you can try to add a little bit more current to that side's driver and see if it helps, in my case it was...
Made a cupcake/donut tiered stand, 5mm cedar ply, used a 1/8" 2 flute carbide endmill at 30mm/s, 2.5mm DOC so I could do it in 2 passes. [ATTACH]...
Must be better now than my recent order. Had a big dent in the Cbeam corner, and the replacement order has a smaller dent, but still useable....
Sure! I'm going to do another batch over the next few days so I'll try to document it this time! Made a few test items out of spare ply before I...
Used the 1015 cut these rings out of wood and resin blocks I made, then chucked them onto a corded drill to sand and shape, finished with a few...
