Separate names with a comma.
Some features disabled for guests. Register Today.
Ooznest claims an accuracy between 0,05 and 0,10mm, which I must say, it's hard to believe. It sound a lot like the car commercials where the...
I think you‘re absolutely right. The CAM side of Fusion is still a very uncharted territory for me. However, as I mentioned, in my last test I did...
Thanks for all the info and insights Giarc and Sharmstr. I used the term Cutter Compensation because it was named like that in the post I saw. I...
As I promised I have just done another test, right now. I did a 3d adaptive clearing operation just like the one before and also a 2d contour...
Thanks for the tip!. I used general purpose grease. Good news are, I only did a small job after that. I will clean them off and put some silicone oil.
I did, in fact, measure the tool and instead of 3,175mm of diameter (1/8") it is 3,13mm. That makes it for (3,175-3,13)*2= 0,09mm of error (about...
Hi all, First time posting here, I hope I haven't overseen anything. I will cut to the chase. I own a 1000x1000 Workbee, screw driven and with a...
